Dr. Abdul Jabbar

Dr. Abdul Jabbar

Assistant Professor

  • Address: Sheikhupura Road, Faisalabad - 37610, Pakistan
  • Phone: +92-41-9230081-85 Ext: 190
  • Fax: +92-41-9230098
  • Email: abduljabbar@ntu.edu.pk
  • No. of Journal Publications: 25
  • No. of Conference Papers: 5

  • PhD Textile Technics and Materials Engineering
    Technical University of Liberec , Czech Republic 
  • MS Textile Engineering
    National Textile University, Faisalabad., Pakistan 
  • BS Textile Engineering
    National Textile University Faisalabad, Pakistan 
1

Latif Wasif, Abdul Basit, Abdur Rehman, Munir Ashraf, Kashif Iqbal, Abdul Jabbar, Sajjad Ahmad Baig, and Shahzad Maqsood., "Study of mechanical and comfort properties of modal with cotton and regenerated fibers blended woven fabrics", Journal of Natural Fibers, Vol. DOI: 10.1080/15440478.2018.1441084 , No. , (2018), pp.

2

Moqeet Hai Abdul, Mehboob Ahmed, Ali Afzal, Abdul Jabbar, and Sajid Faheem, "Characterization and antibacterial property of Kapok fibers treated with chitosan/AgCl–TiO2 colloid ", The Journal of The Textile Institute, Vol. doi: 10.1080/00405000.2018.1466629, No. , (2018), pp.

3

Shaker Khubab, Abdul Jabbar, Mehmet Karahan, Nevin Karahan, and Yasir Nawab, "Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar", Journal of Composite Materials, Vol. 51, No. 1, (2017), pp.1

4

Abdul Jabbar, Jiří Militký, Jakub Wiener, Bandu Madhukar Kale, Usman Ali, and Samson Rwawiire, "Nanocellulose coated woven jute/green epoxy composites: characterization of mechanical and dynamic mechanical behavior", Composites Structures, Vol. 161, No. 340-349, (2017), pp.340-349

5

Ali Usman, Haitao Niu, Sarmad Aslam, Abdul Jabbar, Abdul Waqar Rajput, and Tong Lin, "Needleless electrospinning using sprocket wheel disk spinneret", Journal of Materials Science , Vol. 52, No. 12, (2017), pp.12

6

Abdul Jabbar, Jiří Militký, "Investigation of the creep and dynamic mechanical properties of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers", Vlákna a textil , Vol. 24, No. 3, (2017), pp.3

7

Abdul Jabbar, Jiří Militký, Jakub Wiener, Muhammad Usman Javaid, and Samson Rwawiire, "Tensile, Surface and Thermal Characterization of Jute Fibres after Novel Treatments", Indian Journal of Fibre and Textile Research., Vol. 41, No. , (2016), pp.

8

Abdul Jabbar, Jiří Militký, Jakub Wiener, and Mehmet Karahan, "Static and dynamic mechanical properties of novel treated jute/green epoxy composites", Textile Research Journal, Vol. 86, No. 9, (2016), pp.9

9

Kale Bandu Madhukar, Jakub Wiener, Jiri Militky, Samson Rwawiire, Rajesh Mishra, and Abdul Jabbar, "Dyeing and stiffness characteristics of cellulose-coated cotton fabric", Cellulose, Vol. 23, No. , (2016), pp.

10

Abdul Jabbar, Jiří Militký, Bandu Madhukar Kale, Samson Rwawiire, Yasir Nawab, and Vijay Baheti., "Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers", Industrial Crops and Products, Vol. 84, No. , (2016), pp.

11

Rwawiire Samson, Blanka Tomkova, Jiří Militký, Lubos Hes, Bandu Madhukar Kale, and Abdul Jabbar, "Empirical modelling of sound absorption properties of natural nonwoven fabric (Antiaris toxicaria Barkcloth", Materials Science Forum, Vol. 866, No. , (2016), pp.

12

Rwawiire Samson, Blanka Tomkova, Jakub Wiener, Jiri Militky, Allan Kasedde, Bandu M. Kale and Abdul Jabbar, "Short-term creep of barkcloth reinforced laminar epoxy composites", Composites Part B: Engineering, Vol. 103, No. , (2016), pp.

13

Awais Muhammad, Muhammad Tausif, Faheem Ahmad, Abdul Jabbar, and Sheraz Ahmad, "Inclusion of recycled PPTA fibre in the development of cut resistant gloves", The Journal of the Textile Institute” 2015; 106:354-358., Vol. 106, No. 354-358, (2015), pp.354-358

14

Karahan Mehmet, Abdul Jabbar, and Nevin Karahan, "Ballistic impact behavior of the aramid and ultra-high molecular weight polyethylene composites", Journal of Reinforced Plastics and Composites, Vol. 34, No. 1, (2015), pp.1

15

Rwawiire Samson, Blanka Tomkova, Eulalia Gliscinska, Izabella Krucinska, Marina Michalak, Jiri Militky, and Abdul Jabbar, "Investigation of Sound Absorption Properties of Bark Cloth Nonwoven Fabric and Composites", AUTEX Research Journal, Vol. 15, No. , (2015), pp.

16

Rwawiire Samson, Blanka Tomkova, Jiri Militky, Abdul Jabbar, and Bandu Madhukar Kale, "Development of a biocomposite based on green epoxy polymer and natural cellulose fabric (bark cloth) for automotive instrument panel applications", Composites Part B: Engineering, Vol. 81, No. , (2015), pp.

17

Militký Jiří, and Abdul Jabbar, "Comparative evaluation of fiber treatments on the creep behavior of jute/green epoxy composites", Composites Part B: Engineering, Vol. 80, No. , (2015), pp.

18

Hussain Uzair, Wardah Anam Samee Irshad, Faheem Ahmed, Hammad Abbasi and Abdul Jabbar, "Effect of Different Conditioning Methods on the Properties of Hosiery Yarn and Knitted Fabric", Journal of Engineered Fibers and Fabrics, Vol. 10, No. 3, (2015), pp.3

19

Abdul Jabbar, Mumtaz Hasan Malik, Tanveer Hussain, Adeel Zulifqar, and Muhammad Tausif, "Comparison of mechanical and ballistic performance of composite laminates produced from single-layer and double-layer interlocked woven structures", Polymer Composites, Vol. 35, No. 8, (2014), pp.8

20

Abdul Jabbar, Shakeel Ahmed, Tanveer Hussain, Noman Haleem, and Faheem Ahmed, "Statistical Model for Predicting the Compressed Air Consumption on Air-Jet Looms", Journal of Engineered Fibers and Fabrics, Vol. 09, No. 3, (2014), pp.3

21

Hussain Tanveer, Abdul Jabbar, and Shakeel Ahmed, "Comparison of regression and adaptive neuro-fuzzy models for prediction of compressed air consumption in air jet weaving", Fibres and Polymers, Vol. 15, No. 2, (2014), pp.2

22

Ashraf Usman, Tanveer Hussain, and Abdul Jabbar, "Effect of cotton fibre and yarn charcteristics on colour variation in woven fabric dyed with vat dyes", The Journal of the Textile Institute, Vol. 105, No. , (2014), pp.

23

Haleem Noman, Sayed Ibrahim, Tanveer Hussain, Abdul Jabbar, Mumtaz Hassan Malik, and Zulfiqar Ali Malik, "Determining the light transmission of woven fabric through different measurement methods and its correlation with air permeability", Journal of Engineered Fibers and Fabrics, Vol. 9, No. 4, (2014), pp.4

24

Moqeet, Abdul, Abdul Jabbar, Tanveer Hussain, Zulfiqar Ali, and Zahoor Ul-Haq, "Influence of Splicing Parameters on Retained Splice Strength, Elongation and Appearance of Spliced Cotton/Flax Blended Yarn", Indian Journal of Fibre and Textile Research, Vol. 38, No. 1, (2013), pp.1

25

Abdul Jabbar, Tanveer Hussain, and Abdul Moqeet, "Impact of Carding Parameters and Drawframe Doubling on the Properties of Ring Spun Yarn", Journal of Engineered Fibers and Fabrics, Vol. 8, No. 2, (2013), pp.2

1

A. Jabbar, J. Militký, M. U. Javed, A. Ali , "Investigation of mechanical and thermomechanical properties of nanocellulose coated jute/green epoxy composites", 3rd International Conference of Natural Fibres , Venue: Braga, Portugal, (2017)

2

A. Jabbar, J. Militký , "Investigation of the Mechanical, Creep and Dynamic Mechanical Properties of Jute/Green Epoxy Composites Incorporated with Chemically Treated Nano/Micro Jute Fibers", Aachen-Dresden-Denkendorf International Textile Conference, Venue: Dresden Germany, (2016)

3

A. Jabbar, J. Militký , "Creep behavior of novel treated jute/green epoxy composites", Workshop Světlanka, Venue: Czech Republic, (2015)

4

A. Zulifqar, T. Hussain, M. H. Malik, A. Jabbar and Y. Nawab, "Development and characterization of novel woven structures for ballisitc protective applications", 14th AUTEX, Venue: Bursa, Turkey, (2014)

5

A. Jabbar, M. H. Malik, T. Hussain, A. Zulifqar and M. Tausif , "Experimental study of the low and high velocity impact performance of composites produced from single layer and double layer interlocked woven fabrics", TexComp-11 held in KU Leuven, Belgium, Venue: KU Leuven Belgium, (2013)

Book Title Subject Published Year Publisher
Advances in Natural Fibre Composites Investigation of Mechanical and Thermomechanical Properties of Nanocellulose Coated Jute/Green Epoxy Composites 2018 Springer
Sustainable Jute based Composite Materials: Mechanical and Thermomechanical Behaviour SpringerBriefs in Applied Sciences and Technology 2017 Springer