Muhammad Maqsood

Muhammad Maqsood

Lecturer

  • Address: Sheikhupura Road, Faisalabad - 37610, Pakistan
  • Phone: +92-41-9230081-85 Ext: 292
  • Mobile: 0333-6299045
  • Fax: +92-41-9230098
  • Email: maqsood@ntu.edu.pk / engr.maqsood@hotmail.com
  • No. of Journal Publications: 12
  • No. of Conference Papers: 7

  • On Study Leave

 

 

 

Ø  Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javed, Khubab Shaker, Muhammad Umair “Development of seersucker fabrics using single beam and modeling of their stretch-recovery behavior”. Journal of the Textile Institute 2015, Vol. 106, No. 11, 1154-1160.

Ø  Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad UmairPrediction of warp and weft yarn crimp in cotton woven fabrics”. Journal of the Textile Institute 2015, Vol. 106, No. 11, 1180-1189.

Ø  Muhammad Maqsood, Tanveer Hussain, Mumtaz Hasan Malik, Yasir Nawab “Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments” (Published in Journal of the Textile Institute on 07 April 2015).

Ø  Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad “Development of seersucker knitted fabrics for better comfort properties and aesthetic appearance”. Fibers and Polymers 2015, Vol. 16, No. 3, 699-701.

Ø Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf “Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns” (Published in Journal of the Textile Institute on 12 June 2015) 

Ø Jawairia Umar, Tanveer Hussain, Muhammad Maqsood, Modeling the mechanical and compression properties of polyamide/elastane knitted fabrics for compression sportswear (Published in Journal of the Textile Institute on 15 October 2015)

Ø  Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid “Modeling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics(Accepted in Autex Research Journal on 28 April 2015)

Ø  Khubab Shaker, Yasir Nawab, Muhammad Usman Javed, Muhammad Umair, Muhammad Maqsood Development of 3D woven fabric based pressure switch (Published in Autex Research Journal on 10 March 2015)

Ø  Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit “A statistical approach for obtaining the controlled woven fabric width” (Published in Autex Research Journal on  25 May 2015)

Ø Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar “Effect of woven fabric structure on the air permeability and moisture management properties” (Published in Journal of the Textile Institute on 10 May 2015) 

Ø Syed Talha Ali Hamdani, Anura Fernando, Muhammad Maqsood “Thermo-mechanical behavior of stainless steel knitted structures” (Published in Heat and Mass Transfer Journal on 05 November 2015) 

Ø Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab “Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials” (Accepted in Journal of the Textile Institute on 07 Jan 2016)

  • MSC Textile Engineering
    National Textile University, Pakistan 
  • BSc. Textile Engineering
    BZU Multan, Pakistan  (2005-2009)

Biodegradable Nonwoven Composites, Medical Textiles, Woven Fabrics, Statistical Modeling

  • Deputy Weaving Manager
    Zephyr Textiles Ltd (2009-12)

    Weaving preparatory process, Weaving shed


  • Deputy Weaving Manager
    Suraj Cotton Mills (2012-13)

    Weaving shed


  • Lecturer
    National Textile University, Faisalabad (2013- continue)

    Research and Teaching


1

Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab , "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", Journal of the Textile Institute , Vol. , No. , (2016), pp.

2

Muhammad Maqsood, Tanveer Hussain, Mumtaz Hasan Malik, Yasir Nawab , "Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments", Journal of the Textile Institute , Vol. 107, No. 3, (2015), pp.3

3

Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf , "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", Journal of the Textile Institute , Vol. , No. , (2015), pp.

4

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid , "Modeling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex Research Journal , Vol. , No. , (2015), pp.

5

Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad , "Development of seersucker knitted fabrics for better comfort properties and aesthetic appearance", Fibers and Polymers , Vol. , No. , (2015), pp.

6

Jawairia Umar, Tanveer Hussain, Muhammad Maqsood, "Modeling the mechanical and compression properties of polyamide/elastane knitted fabrics for compression sportswear ", Journal of the Textile Institute , Vol. , No. , (2015), pp.

7

Syed Talha Ali Hamdani, Anura Fernando, Muhammad Maqsood , "Thermo-mechanical behavior of stainless steel knitted structures", Heat and Mass Transfer Journal, Vol. , No. , (2015), pp.

8

Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar , "Effect of woven fabric structure on the air permeability and moisture management properties", Journal of the Textile Institute , Vol. , No. , (2015), pp.

9

Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit , "A statistical approach for obtaining the controlled woven fabric width", Autex Research Journal , Vol. , No. , (2015), pp.

10

Khubab Shaker, Yasir Nawab, Muhammad Usman Javed, Muhammad Umair, Muhammad Maqsood , "Development of 3D woven fabric based pressure switch ", Autex Research Journal , Vol. , No. , (2015), pp.

11

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javed, Khubab Shaker, Muhammad Umair , "Development of seersucker fabrics using single beam and modeling of their stretch-recovery behavior", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

12

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair , "Prediction of warp and weft yarn crimp in cotton woven fabrics", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

1

Muhammad Maqsood, "Development of bi-stretch woven fabrics for compression garments”", MedTex, Venue: Lodz Poland, (2015)

2

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

3

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

4

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

5

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

6

Muhammad Umair, Yasir Nawab, Khubab Shaker, Muhammad Maqsood, "3D shaped woven structures for structural composite applications", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

7

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mehmood Baitab, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

Book Title Subject Published Year Publisher
Textile Engineering Disposal and Recycling of Textiles 2016 De-Guryter
1 Bachelor Development of bi-stretch woven fabrics for compression garments
2 Bachelor To study the effect of yarn material and weave structure on the barrier effectiveness of woven surgical gowns
3 Bachelor Comparison of compression properties of woven bi-stretch and stretchable knitted fabrics
4 Bachelor To study the effect of yarn material and weave structure on the comfort and mechanical properties of woven fabrics
1
Development of eco-friendly, energy efficient, indigenous sizing machine

Awarding Body: Pakistan Science Foundation
Awarding Year: 2015
Amount: 2

1
Best Teacher Award

National Textile University  (2015)

Registered Engineerg

Pakistan Engineering Council