Study of influence of interlocking patterns on mechanical performance of 3D multilayer woven composites
Muhammad Umair, Syed Talha Ali Hamdani, Muhammad Ayub Asghar, Tanveer Hussain, Mehmet Karahan, Yasir Nawab, Mumtaz Ali
Journal of reinforced Plastics and Composites (2017)
Khubab Shaker, Yasir Nawab, Abdelghani Saouab, Munir Ashraf, Ahmad Nawaz Khan
Journal of Textile Institute (2017)
Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre reinforced composite materials
Muhammad Haris Ameer, Khubab Shaker, Yasir Nawab, Mehmet Karahan, Sheraz Ahmad, Munir Ashraf, Muhammad Ali Nasir
Journal of Textile Institute (2017)
Mechanical behaviour of hybrid composites developed from textile waste
Zaid Masood, Sheraz Ahmad, Muhammad Umair, Khubab Shaker, Yasir Nawab, Mehmet Karahan
Fibres and Textiles in Eastern Europe (2017)
Simulation of air bubble’s creation, compression, and transport phenomena in resin transfer moulding
Bouchra Abaoud, Saouab Abdelghani, Yasir Nawab
Journal of Composite Materials (2017)
Fabrication induced spring-back in thermosetting woven composite parts with variable thickness
Mumtaz Ali, Yasir Nawab, Abdelghani Saouab, Aima Sameen Anjum, Muhammad Zeeshan
Journal of Industrial Textiles (January 2017)
Investigation of Mechanical Behavior of Woven/Knitted Hybrid Composites
Waqas Ashraf, Yasir Nawab, Muhammad Umair, Khubab Shaker, Mehmet Karahan
The Journal of the Textile Institute (November 2016)
The development of novel auxetic woven structure for impact applications
Muhammad Liaqat, Hafiz Abdul Samad, Talha Hamdani, Yasir Nawab
Journal of Textile Institute (September 2016)
Static and dynamic mechanical properties of cotton/epoxy green composites
Koyuncu M, Karahan M, Karahan N, Shaker K, Nawab Y
Fibers & Textiles in Eastern Europe (2016)
Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in
Nawab Y, Sonnenfeld C, Saouab A, Agogué R, Beauchêne P
Journal of Composite Materials (2016), doi:0021998316661404.
Hydrophobic treatment of natural fibers and their composites – A review
Azam Ali, Khubab Shaker, Yasir Nawab, Madeha Jabbar, Tanveer Hussain, Jiri Militky, Vijay Baheti
Journal of Industrial Textiles (2016), doi:10.1177/1528083716654468
Investigating the mechanical behavior of composites made from textile industry waste
Muhammad Umar, Khubab Shaker, Sheraz Ahmad, Yasir Nawab, Muhammad Umair, Muhammad Maqsood
Journal of Textile Institute (2016),
Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers
Jabbar, J. Militký, B. Madhukar Kale, S. Rwawiire, Y. Nawab, and V. Baheti
Industrial Crops and Products (2016),
Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar
Shaker K, Jabbar A, Karahan M, Karahan N, Nawab Y
Journal of Composite Materials (2016), doi: 10.1177/0021998316635241
Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material
Ali A, Shaker K, Nawab Y, Ashraf M, Basit A, Shahid S, Umair M
Journal of Reinforced Plastics and Composites (2015), doi: 10.1177/0731684415610007
Bioactive woven flax- based composites: Development and characterisation
Shaker K, Ashraf M, Jabbar M, Shahid S, Nawab Y, Zia J, Rehman A
Journal of Industrial Textiles (2015), doi: 10.1177/1528083715591579
Development and characterization of three-dimensional woven-shaped preforms and their associated composites
Umair M, Nawab Y, Malik MH, Shaker K
Journal of Reinforced Plastics and Composites (2015), doi: 10.1177/0731684415608958
Modeling the residual stress in woven thermoset composites parts for aerospace applications using finite element methods
Nawab Y, Park CH, Saouab A, Agogue R, Beauchene P
Advanced Material Research (2015), doi: 10.4028/www.scientific.net/AMR.1099.32
In situ characterisation of in-plane chemical shrinkage of thermoset laminated composite plates using a simple setup
Nawab Y, Casari P, Boyard N, Sobotka V, Jacquemin F
Journal of Reinforced Plastics and Composites (2015)
Shape Distortion of Carbon/Epoxy Composite Parts During Fabrication
Nawab Y, Park CH, Saouab A, Agogue R, Beauchene P, Desjoyaux B
Macromolecular Symposium (2014)
Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates
Nawab Y, Jacquemin F, Casari P, Boyard N, Borjon-Piron Y, Sobotka V
Composites Part B: Engineering (2013), doi: 10.1016/j.compositesb.2013.02.002
Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment
Nawab Y, Casari P, Boyard N, Jacquemin F
Journal of Material Science (2013), doi: 10.1007/s10853-012-7026-6
Chemical shrinkage characterization techniques for thermoset resins and associated composites
Nawab Y, Shahid S, Boyard N, Jacquemin F
Journal of Material Science (2013)
Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite
Nawab Y, Boyard N, Jaquemin F
Journal of Composite Materials (2013), doi: 10.1177/0021998313502692
Evolution of chemical and thermal curvatures in thermoset-laminated composite plates during the fabrication process
Nawab Y, Jacquemin F, Casari P, Boyard N, Sobotka V
Journal of Composite Materials (2012)
Study of changes in 3D-woven multilayer interlock fabric preforms while forming
Nawab Y, Legrand X, Koncar V
Journal of The Textile Institute (2012), doi: 10.1080/00405000.2012.676267
Measurement and modelling of chemical shrinkage of thermoset composites
Nawab Y, Boyard N, Sobotka V, Casari P, Jacquemin F
Key Engineering Materials (2012), doi: 10.4028/www.scientific.net/KEM.504-506.1129
Shape evolution of carbon epoxy laminated composite during curing
Nawab Y, Jacquemin F, Casari P, Boyard N, Sobotka V
Key Engineering Materials (2012), doi: 10.4028/www.scientific.net/KEM.504-506.1145
Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients
Nawab Y, Tardif X, Boyard N, Sobotka V, Casari P, Jacquemin F
Composites Science and Technology (2012)