Dr. Muhammad Ali Afzal

Dr. Muhammad Ali Afzal

Dr. Muhammad Ali Afzal

Assistant Professor

  •  Address: LPMT, ENSISA-UHA, Mulhouse - 68200, France
  •  Phone: +92-41-9230081-85 Ext: 175
  •  Fax: +92-41-9230098
  •  Email: aliafzal@ntu.edu.pk / aliafzalch89@gmail.com
  • No. of Journal Publications: 32
  • No. of Conference Papers: 53



  1. PhD in Mechanical Engineering
    Université de Haute Alsace, France  (2016)
  2. Master of Textile Engineering
    National Textile University, Faisalabad, Pakistan  (2012)
  3. Bachelor of Textile Engineering
    National Textile University, Faisalabad, Pakistan  (2009)

Textiles Machinery and Instrument design, Technical Textiles, Engineered Textile Structures & Composites, Advanced Materials, Clothing Engineering, Textile Modeling and Simulation, Sensors and Actuators, development of engineered yarns and filaments and their characterization, Drug delivery systems

 


  1. Assistant Professor
    National Textile University (5 years)

  2. Lecturer
    National Textile University (4.5 Years)

  3. Lecturer
    The University of Faisalabad (1 Year)

  4. Assistant Spinning Manager
    Mayfair Limited (1 Year)


2022

1

Abid Noor, Ali Afzal, Rashid Masood, Zubair Khaliq, Sheraz Ahmad, Faheem Ahmad, Muhammad-Bilal Qadir, Muhammad Irfan, "Dressings for Burn Wound-A review", Journal of Materials Science, Vol. JMSC-D-21-05881R2, No. , (2022), pp.

2021

2

Ali Afzal, Farooq Azam, Sheraz Ahmad, Zubair Khaliq, Amir Shahzad, Muhammad Bilal Qadir, Abdul Moqeet Hai, "Development and Characterization of biodegradable starch-based fibre by wet extrusion", Cellulose, Vol. 28, No. , (2021), pp.

3

Ali Afzal, Zubair Khaliq, Sheraz Ahmad, Faheem Ahmad, Abid Noor, Muhammad Bilal Qadir, "Development and Characterization of Biodegradable Composite Film", Environmental Technology & Innovation, Vol. 23, No. August, (2021), pp.August

4

Faheem Ahmad, Bushra Mushtaq, Faaz Ahmad Butt, Muhammad Sohail Zafar, Sheraz Ahmad, Ali Afzal, Yasir Nawab, Abher Rasheed, Zeynep Ulker, "Synthesis and Characterization of Nonwoven Cotton Reinforced Cellulose Hydrogel for Wound Dressings", Polymers, Vol. 13, No. 23, (2021), pp.23

5

Ali Afzal, Abdul Waqar Rajput, Hafsa Jamshaid, Sajid Hussain, Syeda Sidra Batool, Usman Ali, "Investigation of frictional impact on polyester yarn during knitting", Industria Textila, Vol. 72, No. 6, (2021), pp.6

2020

6

Khurram Shehzad Akhtar, Sheraz Ahmad, Ali Afzal, Warda Anum, Zulfiqar Ali, Tanveer Hussain, "Influence and comparison of Emerging Techniques of Yarn Manufacturing on Physical-mechanical Properties of Polyester/Cotton Blended Yarns and their Woven Fabrics", Journal of the Textile Institute, Vol. 111, No. 4, (2020), pp.4

7

Sheraz Ahmad, Karamat Subhani, Abher Rasheed, Munir Ashraf, Ali Afzal, Babar Ramzan, Zahid Sarwar, "Development of conductive fabrics by using silver nano particles for electronic applications", Journal of Electronic Materials, Vol. 49, No. 2, (2020), pp.2

8

Muhammad Bilal Qadir, Zulfiqar Ali, Ali Afzal, Muhammad Irfan, Tanveer Hussain, Mumtaz Hassan Malik, Muhammad Waqas Iqbal, Amir Shahzad, Adnan Ahmad, Zubair Khaliq, "Effect of elastane parameters on the dimensional and mechanical properties of stretchable denim fabrics", Clothing and Textiles Research Journal , Vol. Online on 03 November 2020, No. 10.1177/0887302X20968812, (2020), pp.10.1177/0887302X20968812

2019

9

Khubab Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad, "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. 23, No. 5, (2019), pp.5

10

Abdul Moqeet, Mehboob Ahmed, Ali Afzal, Abdul Jabbar, Sajid Faheem, "Characterization and antibacterial property of Kapok fibres treated with chitosan/AgCl - TiO2 Colloid", Journal of The Textile Institute, Vol. 110, No. 1, (2019), pp.1

11

Babar Ramzan, Abher Rasheed, Zulfiqar Ali, Sheraz Ahmad, Muhammad Salman Naeem, Ali Afzal, "Impact of wash types and stitching parameters on shrinkage of knitwear made from pique fabric", International Journal of Clothing Science and Technology, Vol. 31, No. 2, (2019), pp.2

12

Ali Afzal, Omar Harzallah, Jean Yves Drean, Niaz Ahmad Akhtar, Sheraz Ahmad, "Performance characterization of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Journal of Industrial Textiles, Vol. 48, No. 06, (2019), pp.06

13

Amir Shahzad, Abher Rasheed, Zubair Khaliq, Muhammad Bilal Qadir, Muhammad Qamar Khan, Syed Talha Ali Hamdani, Zulfiqar Ali, Ali Afzal, Muhamad Irfan, Muhammad Shafiq, Ick Soo Kim, "Processing of metallic fiber hybrid spun yarns for better electrical conductivity", Materials and Manufacturing Processes, Vol. 34, No. 9, (2019), pp.9

14

Husnain Ahmad, Asra Tariq, Amir Shehzad, Muhammad S. Faheem, Muhammad Shafiq, Iqra Abdul Rashid, Ayesha Afzal, Adnan Munir, Muhammad T. Riaz, Hafiz T. Haider, Ali Afzal, Muhammad Bilal Qadir, Zubair Khaliq, "Stealth technology: Methods and composite materials—A review", Polymer Composites, Vol. 40, No. 12, (2019), pp.12

15

Wardah Anam, Munir Ashraf, Muhammad Bilal Qadir, Khurram Shehzad Akhtar, Sheraz Ahmad, Ali Afzal, Tehseen Ullah, "Influence of Yarn Manufacturing Techniques on dyeing behavior of Polyester/Cotton Blended Woven Fabrics", Fibers and Polymers, Vol. 20, No. 12, (2019), pp.12

2018

16

Khurram Shahzad, Ali Afzal, Zahid Sarwar, Kashif Iqbal, Sheraz Ahmad, "Investigation of manufacturing and processing techniques on shade variation and performance characteristics of woven fabrics", Journal of Engineered Fibers and Fabrics, Vol. 13, No. 03, (2018), pp.03

17

Abdul Basit, Wasif Latif, Sajjad Ahmad Baig, Ali Afzal, "The Mechanical and Comfort Properties of Sustainable Blended Fabrics of Bamboo With Cotton and Regenerated Fibers", Clothing and Textiles Research Journal, Vol. 36, No. 04, (2018), pp.04

18

Amir Shahzad, Naseer Ahmad, Zulfiqar Ali, Ali Afzal, Muhammad Bilal Qadir, Zubair Khaliq, Muhammad Qamar Khan, "Statistical analysis of yarn to metal frictional coefficient of cotton spun yarn using Taguchi design of experiment", Journal of Strain Analysis for Engineering Design, Vol. 53, No. 07, (2018), pp.07

2017

19

Sheraz Ahmad, Munir Ashraf, Azam Ali, Khubab Shaker, Muhammad Umair, Ali Afzal, Yasir Nawab, Abher Rasheed, "Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver and Copper Nanoparticles", Fibres and Textile in Eastern Europe, Vol. 25, No. 5(125), (2017), pp.5(125)

20

A. Afzal, S. Ahmad, A. Rasheed, M. Mohsin, F. Ahmad, Y. Nawab, "Characterization and statistical modelling of thermal resistance of cotton/polyester blended double layer interlock knitted fabrics", Thermal Science, Vol. 21, No. 6A, (2017), pp.6A

21

A. Afzal, S. Ahmad, A. Rasheed, F. Ahmad, F. Iftikhar, Y. Nawab, "Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics", AUTEX Research Journal, Vol. 17, No. 1, (2017), pp.1

22

A. Nazir, T. Hussain, A. Afzal, S. Faheem, W. Ibrahim, M. Bilal, "Prediction and correlation of air permeability and light transmission properties of woven cotton fabrics", AUTEX Research Journal, Vol. 17, No. 1, (2017), pp.1

23

A. Afzal, J.Y. Drean, O. Harzallah, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Textile Research Journal, Vol. 87, No. 16, (2017), pp.16

2016

24

M. Mohsin, N. Sarwar, S. Ahmad, A. Rasheed, F. Ahmad, A. Afzal, S. Zafar, "Maleic acid crosslinking of C-6 fluorocarbon as oil and water repellent finish on cellulosic fabrics", Journal of Cleaner Production, Vol. 112, No. 4, (2016), pp.4

2015

25

S. Ahmad, A. Rasheed, A. Afzal, F. Ahmad, M. Mohsin, N. A. Akhtar, "Effect of weave structure on thermo-physiological properties of cotton fabrics", AUTEX Research Journal, Vol. 15, No. 01, (2015), pp.01

26

M. Mohsin, N. Ramzan, S.W. Ahmad, A. Afzal, H. G. Quatab, A. Mehmood, "Development of environment friendly bio cross-linker finishing of silk fabric", Journal of Natural Fibers, Vol. 12, No. 3, (2015), pp.3

2014

27

A. Afzal, T. Hussain, H. Malik, Z. Javed, "Statistical model for Predicting the air permeability of Polyester/Cotton blended interlock knitted fabrics", The Journal of The Textile Institute, Vol. 105, No. 02, (2014), pp.02

28

A. Afzal, T. Hussain, M. H. Malik, A. Rasheed, S. Ahmad, A. Basit, A. Nazir, "Investigation and modelling of air permeability of Cotton/Polyester blended double layer interlock knitted fabrics", Fibers and Polymers, Vol. 15, No. 07, (2014), pp.07

29

A. Afzal, T. Hussain, M. Mohsin, A. Rasheed, S. Ahmad, "Statistical models for predicting the thermal resistance of polyester/cotton blended interlock knitted fabrics", International Journal of Thermal Sciences, Vol. 85, No. November, (2014), pp.November

30

M. Mohsin, U. Farooq, Z.A. Raza, M. Ahsan, A. Afzal, A. Nazir, "Performance enhancement of wool fabric with environment friendly bio cross-linker", Journal of Cleaner Production, Vol. 68, No. 01, (2014), pp.01

31

A. Rasheed, S. Ahmad, M. Mohsin, F. Ahmad, A. Afzal, "Geometrical model to calculate the consumption of sewing thread for 301 lock-stitch", The Journal of The Textile Institute, Vol. 105, No. 12, (2014), pp.12

32

Ahsan Nazir, Tanveer Hussain, Qummer Zia, Muhammad Ali Afzal, "Improving thermo-physiological comfort of polyester/cotton knits by caustic and cellulases treatments", AUTEX Research Journal, Vol. 14, No. 3, (2014), pp.3


2022

1

Bushra Malik, M. Aamir, Ali Afzal, "Agave americana fibers: A potential natural fiber for biomedical applications", Conference on Knowledge based textile 2022, Venue: Faisalabad, (2022)

2

M. Tahir Mansoor, M. Umar Farooq, Ali Afzal, "Development of crotalaria juncea fiber yarn through rotor spinning process: An economical natural fiber for course yarn applications", Conference on Knowledge based textile 2022, Venue: Faisalabad, (2022)

2021

3

Ali Afzal, Salman Saeed, Naqash Ahmad, Amna Siddique, "Investigation of Raw material characteristics of Polyvinvyl alcohol filament for suture applications", 1st International Conference on Polymers & Composites, Venue: Faisalabad, (2021)

4

Ali Afzal, Muhammad Tahir Manzoor, Muhammad Umar Farooq, Amna Siddique, "Sunn hemp: An economical fiber for low end applications", 7th International Conference on Textile and Clothing, Venue: Lahore, (2021)

5

Usman Ahmed, Yasir Nawab, Ali Afzal, Muhammad Umair, Tanveer Hussain, "Improvement in Comfort Properties of Gloves for Fighter Jet Pilots", The International Conference of Applied Research on Textile & Materials (CIRAT-9), Venue: Ksar Hellal, Tunisia, (2021)

2020

6

Muhammad Bilal Qadir, Amir Shahzad, Ali Afzal, Zubair Khaliq, Zulfiqar Ali, Bushra Mushtaq, "Development of multi-structural auxetic yarn having wool yarn as core and polyester filament as covering", 2nd International Conference on Technical Textiles, Venue: Faisalabad, (2020)

7

Zulfiqar Ali, Amir Shahzad, Ali Afzal, Zubair Khaliq, Muhammad Bilal Qadir, "Development of sustainable apparel products through dope dyed filaments", 2nd International Conference on Technical Textiles, Venue: Faisalabad, (2020)

8

Ali Afzal, Muhammad Bilal Qadir, Zulfiqar Ali, Muhammad Waqas Iqbal, "Improvement in quality and productivity through implementation of measurement system analysis approach", 2nd International Conference on Technical Textiles, Venue: Faisalabad, (2020)

9

Muhammad Waqas Iqbal, Muhammad Bilal Qadir, Zulfiqar Ali, Ali Afzal, "Value extraction from end-of-life textile products", 2nd International Conference on Technical Textiles, Venue: Faisalabad, (2020)

10

Shahzad Shaffi, M. Ali Afzal, Tehseen Ullah, Zubair Khaliq, Amjed Javid, Bilal Qadir, Asad Saeed and Abid Noor, "Development of wet spun fibers containing novel drug for healing diabetic wounds", 2nd International Conference on Technical Textiles, Venue: Faisalabad, (2020)

2019

11

Ali Afzal, Mydah Khan, Aroobah Mumtaz, Ehsan Ali, Amjad Javid, M. Bilal Qadir, "Coating of Citrus Cellulose Extracted from Citrus Peel Waste on Fabric for Technical Applications", The Fiber Society’s Fall 2019 Technical Meeting and Conference on ‘Revitalizing the Textile Industry through Innovative Research, Education and Entrepreneurship’, Venue: Austin, Texas, United States of America, (2019)

12

Zulfiqar Ali, Amir Shahzad, Zubair Khaliq, Ali Afzal, M. Bilal Qadir, "Cost of end breakages in ring spinning technique", 5th International Conference on Value Addition & Innovation in Textiles, Venue: Faisalabad, (2019)

13

Ali Afzal, Zulfiqar Ali, Muhammad Bilal Qadir, Amir Shahzad, Zubair Khaliq, "Development of melt extrusion die for composite filament fabrication: Part C", 5th International Conference on Value Addition & Innovation in Textiles, Venue: Faisalabad, (2019)

14

Zubair Khaliq, Zulfiqar Ali, Muhammad Bilal Qadir, Amir Shahzad, Ali Afzal, "Effect of dual solvent system on the physical properties of polyvinyl alcohol solutions", 5th International Conference on Value Addition & Innovation in Textiles, Venue: Faisalabad, (2019)

15

Amir Shahzad, Zulfiqar Ali, Ali Afzal, Zubair Khaliq, Muhammad Bilal Qadir, "Study the effect of blend composition, twist and atmospheric moisture on the properties of hybrid spun conductive yarns", 5th International Conference on Value Addition & Innovation in Textiles, Venue: Faisalabad, (2019)

16

Muhammad Bilal Qadir, Zulfiqar Ali, Ali Afzal, Zubair Khaliq, Amir Shahzad, "Enhanced thermo-physiological comfort of denim fabrics with coolmax-Lycra blended weft yarns", 5th International Conference on Value Addition & Innovation in Textiles, Venue: Faisalabad, (2019)

17

Amir Shahzad, Zubair Khaliq, Muhammad Ali Afzal, Muhammad Bilal Qadir, "Study of mechanical and comfort properties of woven fabrics engineered for summer wear applications", 6th International Conference on Textile and Clothing, Venue: Lahore, (2019)

18

Zubair Khaliq, Muhammad Bilal Qadir, Amir Shahzad, Muhammad Ali Afzal, "The effects of temperature on the chain structure of cellulose in DMAc and LiCl", 6th International Conference on Textile and Clothing, Venue: Lahore, (2019)

19

Muhammad Bilal Qadir, Zubair Khaliq, Muhammad Ali Afzal, Amir Shahzad, "Development of multi structural auxetic yarn by using different diameter of rubber covered with polyester filaments", 6th International Conference on Textile and Clothing, Venue: Lahore, (2019)

20

Ali Afzal, Muhammad Bilal Qadir, Amir Shahzad, Ahsan Nazir and Zubair Khaliq, "Effect of molecular weight on frictional and bending properties of piezoelectric/copper coaxial composite structures", 6th International Conference on Textile and Clothing, Venue: Lahore, (2019)

2018

21

Ali Afzal*, Jean-Yves Drean, Muhammad Bilal Qadir, Ahsan Nazir, Zulfiqar Ali, Zubair Khaliq, "Extrusion die design for composite filament fabrication: Part A", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, Pakistan, (2018)

22

Zulfiqar Ali*, Muhammad Shahnawaz, Muhammad Bilal Qadir, Zubair Khaliq, Ali Afzal, Amir Shahzad, "Development of comfortable fire-resistant fabrics for bed sheets", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, (2018)

23

Ahsan Nazir*, Zubair Khaliq, Zulfiqar Ali, Ali Afzal, Amir Shahzad, Muhammad Bilal Qadir, "Development of electrospun nanofiber incorporated facemask and study of its performance and comfort properties", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, (2018)

24

Amir Shahzad*, Muhammad Bilal Qadir, Zubair Khaliq, Ali Afzal, Ahsan Nazir, Zulfiqar Ali, "Development of light weight and low cost thermal blanket", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, (2018)

25

Muhammad Bilal Qadir*, Zulfiqar Ali, Ali Afzal, Amir Shahzad, Zubair Khaliq, Ahsan Nazir, "Extraction of sugarcane fibers from sugarcane bagasse and optimization of different parameters of fibers for the textile applications", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, (2018)

26

Zubair Khaliq*, Ahsan Nazir, Muhammad Bilal Qadir, Zulfiqar Ali, Amir Shahzad, Zubair, Ali Afzal, "Thermal characterization of physical properties of cellulose solutions in n,n-dimethyl acetamide and lithium chloride", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, (2018)

27

Zulfiqar Ali Malik, Amir Shahzad, Ali Afzal, Zubair Khaliq, Muhammad Bilal Qadir, "Spun Yarn Quality Requirements for Knitting Industry", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

28

Ahsan Nazir, Muhammad Bilal Qadir, Amir Shahzad, Zulfiqar Ali Malik, Zubair Khaliq, Ali Afzal, "Effect of Hydrophilic and Hydrophobic Alternate Yarns on the Moisture Management Properties of Knitted Fabric", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

29

Muhammad Bilal Qadir, Zulfiqar Ali Malik, Ahsan Nazir, Ali Afzal, Zubair Khaliq, Amir Shahzad, "Preparation of Cotton/ Acrylic/ Thermolite Tri-blend Yarn for Thermal Comfort of Knitted Fabrics", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

30

Amir Shahzad, Zulfiqar Ali Malik, Ahsan Nazir, Ali Afzal, Zubair Khaliq, Muhammad Bilal Qadir, "Development and Characterization of Water Wicking Behavior of Hosiery Yarns and Knitted Fabrics", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

31

Ali Afzal, Tanveer Hussain, Muhammad Bilal Qadir, Amir Shahzad, Zubair Khaliq, Ahsan Nazir, "Thermo-physiological Comfort Analysis of Polyester Cotton Blended Interlock Knitted Fabrics", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

32

Zubair Khaliq, Amir Shahzad, Ahsan Nazir, Ali Afzal, Muhammad Bilal Qadir, "Rheological Investigation of the Polyvinyl Alcohol Solutions as Resin for Knitted Structure Based Composites", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

33

Jamal Akbar, Hafsa Jamshaid, Ali Afzal, Muzammil Hussian, Sikander Abbas Basra, Haritham Khan, Hafiz Shabaz, Norina Asfand, Usman Ahmed, "Study the Abrasion Effect on Polyester Yarn Due to Elevated Temperature During Knitting", 1st International Conference on Emerging Trends in Knitting, Venue: Faisalabad, (2018)

2017

34

A. Afzal, S. Hussain, "Comparison of thermo-physiological comfort properties of single and plied weft yarns of plain weaved fabric", 5th International Conference of Textile and Clothing, Venue: Lahore, Pakistan, (2017)

35

Ali Afzal*, Jean Yves Drean, Omar Harzallah, Sheraz Ahmad, Niaz Ahmad Akhtar, "Development of core sheath filament for SMART textile applications", Fiber Society’s 2017 Fall Conference, Venue: Athens, Georgia, USA, (2017)

36

Ali Afzal*, Zulfiqar Ali, Bilal Qadir, Amir Shahzad, Abdul Jabbar, Ahsan Nazir, "Development of spinneret design for composite filament fabrication: Part B", 1st International Conference on Technical Textiles, Venue: Faisalabad, Pakistan, (2017)

37

Mariam Jabbar, Abher Rasheed, Nasir Mehmood, Ali Afzal, Nauman Ali, "Characterization of conductive threads for heating textiles", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

38

Ahsan Nazir, Muhammad Bilal Qadir, Abdul Jabbar, Hafiz Affan Abid, Zubair Khaliq, Ali Afzal, "Combined easy-care and water repellent finishing of cotton fabrics using plasma treatment", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

39

Zulfiqar Ali, Bilal Qadir, Ahsan Nazir, Zubair Khaliq, Abdul Jabbar, Ali Afzal, "Development of NIR camouflage fabric by using carbon black polyester", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

40

Ahsan Nazir*, Muhammad Bilal Qadir, Zulfiqar Ali Malik, Abdul Jabbar, Affan Abid, Amir Shahzad, Zubair Khaliq, Muhammad Ali Afzal, "Filtration and comfort properties of face masks containing polyamide electro-spun nanowebs", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

41

Abdul Jabbar, Ali Afzal, Zulfiqar Ali Malik, Muhammad Bilal Qadir, Ahsan Nazir, Hafiz Affan Abid, "Mechanical behavior of nanocellulose coated Jute/green epoxy composites", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

42

Zulfiqar Ali, Bilal Qadir, Amir Shahzad, Hafiz Affan Abid, Ali Afzal, "Potential of nonwoven textile for Pakistan’s industry", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

43

Muhammad Bilal Qadir, Amir Shahzad, Abher Rasheed, Ali Afzal, Hafiz Affan Abid, "Processing and development of multifunctional yarns and fabrics for interactive gloves", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

44

Zubair Khaliq, Zulfiqar Ali Rehan, Zulfiqar Ali, Amir Shahzad, Ahsan Nazir, Ali Afzal, Muhammad Bilal Qadir, "The polyelectrolyte behavor of cellulose solutions in N, N-dimethyl acetamide and lithium chloride", 1st International Conference on Technical Textiles, Venue: Faisalabad, (2017)

2016

45

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Development of composite filament by conventional melt extruder", The Fiber Society Spring 2016 Conference, Venue: Mulhouse, France, (2016)

46

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Evaluation of dimensional stability in cutting of coaxial composite filaments", 16th AUTEX World Textile Conference, Venue: Ljubljana, Slovenia, (2016)

2015

47

A. Afzal, J.Y. Drean, N. Khenoussi, N.A. Akhtar, S. Ahmad, "Influence of drawing parameter on the development of composite polymeric technical filaments", 3rd International Conference on Value Addition and Innovation in Textile – COVITEX 2015, Venue: Faisalabad, Pakistan, (2015)

48

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Influence of spinneret parameter on the development of composite polymeric technical filaments", 15th AUTEX World Textile Conference, Venue: Bucharest, Romania, (2015)

49

F. Ahmad, M. Tausif, M.H. Malik, T. Hussain, A. Afzal, "Effect of key process variables of hydro entanglement on mechanical and comfort properties of nonwoven fabrics", 15th AUTEX World Textile Conference, Venue: Bucharest, Romania, (2015)

50

A. Afzal, N. Khenoussi, S. Ahmad, J.Y. Drean, N.A. Akhtar, "Development of composite technical filament for smart applications", The 13th Asian Textile Conference, Venue: Geelong, Victoria, Australia, (2015)

2014

51

A. Afzal, S. Hussain, "Comparison of moisture management properties of single and plied weft yarns of plain weaved fabric", 1st International Young Engineers Convention (IYEC), Venue: Lahore, Pakistan, (2014)

52

A. Rasheed, I. Akhtar, F. Iftikhar, A. Afzal, "Modelling of sewing thread consumption for stitch class 301", 1st International Young Engineers Convention (IYEC), Venue: Lahore, Pakistan, (2014)

2013

53

A. Afzal, T. Hussain, H. Malik, A. Nazir, F. Ahmad, "Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics", The 12th Asian Textile Conference, Venue: Shanghai, China, (2013)


Book Title Subject Published Year Publisher
Fibres for Medical Textile in "Fibers for Technical Textiles" Medical Textiles 2020 Springer Nature Switzerland AG
Advanced textile testing techniques Textile Testing 2017 Taylor & Francis Group, CRC Press

2021

1 MS/MPhil Development of High Performance Functional Fabric for Various Applications
2 MS/MPhil Cut Resistance of Protective Gloves made from High Performance Yarns

2020

3 MS/MPhil Development of Nonwoven Felt Using Recycled Para-aramid Spinning Waste for Cut-resistant Gloves
4 MS/MPhil Development of Novel Spinneret for Needleless Electrospinning for Higher Production
5 MS/MPhil Development of Alginate/Chitosan Fibers Containing Antibiotic Drug
6 MS/MPhil Development of Knitted Socks with Improved Thermo-physiological Comfort
7 MS/MPhil Development of a Textile Based Medical Patch as Topical Drug Delivery System

2017

8 MS/MPhil Development of light weight heating vest for thorax protection after pneumonectomy treatment
9 MS/MPhil Development of Explosion resistant auxetic woven fabric
10 MS/MPhil Influence of spinning techniques on mechanical and comfort properties of PC blended woven fabrics
1
Development of a textile based medical patch as topical drug delivery system

Awarding Body: Higher Education Commission, Pakistan
Awarding Year: 2019
Amount: 15

2
Development and characterization of a starch based biodegradable fiber

Awarding Body: Higher Education Commission, Pakistan
Awarding Year: 2018
Amount: 1

3
Development of regenerated cellulosic fibers from citrus waste

Awarding Body: National Textile University, Pakistan
Awarding Year: 2018
Amount: 0

1
PhD Scholarship
National Textile University  (2014)
2
Gold Medal
National Textile University  (2012)
3
B.Sc Merit Scholarship
National Textile University  (2008)

Registered Engineer
Pakistan Engineering Council

Member
Pakistan Engineering Congress

Member
The Institution of Engineers Pakistan