Dr. Yasir Nawab

Dr. Yasir Nawab

Dr. Yasir Nawab

Associate Professor

  •  Address: Sheikhupura Road, Faisalabad - 37610, Pakistan
  •  Phone: +92-41-9230081-85 Ext: 211
  •  Direct Line: +92-41-9230076
  •  Fax: +92-41-9230098
  •  Email: ynawab@ntu.edu.pk / yasir.nawab@yahoo.com
  • No. of Journal Publications: 72
  • No. of Conference Papers: 22


Biography

Dr. Yasir Nawab is an Associate Professor at the National Textile University, Faisalabad, Pakistan. Currently, he is working as Director (Dean) Faculty of Engineering & Technology, Chairman of Polymer Engineering department and leading the Textile Composite Materials Research Group. His research areas are Composite Materials, 2D & 3D woven fabrics and Finite element analysis. Three (3) PhD and fourty (40)  MS students have completed their degrees under his supervision. He is the author of over 90 peer-reviewed journal articles, 5 books/book chapters and over 35 conference communications. He is the founding Director of National Center for Composite Materials.

He is a Textile Engineer and gold medalist (2004) from National Textile University. He completed his Masters in 2009 from (ENSAIT) Ecole Nationale Superieure des Arts et Industries Textiles, France. He received his Ph.D from the University of Nantes, France in the domain of composite materials in 2012, which was declared as Remarkable Ph.D in science & Technology in that year. In 2013, he did his postdoc from the ONERA (The French Aerospace lab) and University of Le Havre, France. He received HEC's Best University Teacher Award for year 2016 and Dice Leadership Award in year 2018. He is fluent in English, French, Urdu and Punjabi, experienced in developing course curricula as well as executing field trips, laboratory exercises, and other activities beyond traditional lectures. He Has experience of working on various administrative posts including Head of Department, Dean, Director Graduate Studies and Research, Director Student Affairs etc. He is a member of Govt. Pakistan’s sub-working group on CPEC (Textiles), Focal person Technology Updgradation Fund (TUF) Scheme-Ministry of Textiles, Chairperson DiceTextile Pakistan and member of several national and international professional bodies. 

He has worked in Pakistani industry, and gained teaching and research experience from local as well as International institutes.


  1. Post Doctorate (Composite materials)
    ONERA, France  (2012-13)
  2. Ph.D (Mechanical Engg.)
    University of Nantes, France  (2009-12)
  3. Masters (Materials & Textile processing)
    ENSAIT (Roubaix)/ ENSAM (Paris, France  (2008-09)
  4. B.Sc Textile Engg
    NTU, Faisalabad., Pakistan  (2000-04)

  • Technical Textiles
  • Composite Materials
    • Composites for Ballistic applications  
    • Composites for Aerospace & Automotive 
    • Natural Fiber reinforced Composites 
  • 2D & 3D woven fabric structures

  1. Associate Professor
    National Textile University (2018 - to date)

    Teaching, Research and administration


  2. Director (Dean) Faculty of Engineering & Technology
    National Textile University (2018 - to date)

    To look after affairs of Faculty of Engineering & Technology


  3. Assistant Professor
    National Textile University (2013 - 2018)

    Teaching, Research, Management


  4. Director Graduate Studies & Research
    National Textile University (2016 - 2018)

  5. Chairman Department of Weaving
    National Textile University (2013 - 2018)

  6. Chairman Department of Polymer Engineering
    National Textile University (Since 2016)

  7. Advisor Students
    National Textile University (2014 - 2016 )

  8. Chairman Department of Knitting
    National Textile University (2014 - 2016)

  9. Vacataire (Lecturer)
    IUT Saint Nazaire, University of Nantes - France (2011-12)

    Teaching


  10. A. Manager
    Crescent Textile Mills (2005-2008)

    Quality Control, Product Developement, Production & Planning


  11. Researcher
    University of Le Havre - France & The French Aerospace Lab (ONERA), Paris - France  (2012-13)

    Research



2019

1

Siddique A., Abid S., Shafiq F., Nawab Y., Wang H., Shi B., Saleemi S., Sun B., "Mode I fracture toughness of fiber-reinforced polymer composites: A review", Journal of Industrial Textiles, Vol. , No. , (2019), pp.

2

Zahid S., Nasir M.A., Nauman S., Karahan M., Nawab Y., Ali H.M., Khalid Y., Nabeel M., Ullah M., "Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes", Journal of Mechanical Science and Technology, Vol. 33, No. , (2019), pp.

3

Iftekhar H., Ullah Khan R.M.W., Asghar M.A., Qadeer A., Umair M., Nawab Y., Hamdani S.T.A., "Study of comfort performance of novel car seat design for long drive", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. , No. , (2019), pp.

4

Ameer M.H., Nawab Y., Ali Z., Imad A., Ahmad S., "Development and characterization of jute/polypropylene composite by using comingled nonwoven structures", Journal of the Textile Institute, Vol. , No. , (2019), pp.

5

Raza M., Shaker K., Nawab Y., Saouab A., "Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles", International Journal of Advanced Manufacturing Technology, Vol. 103, No. , (2019), pp.

6

Ali M., Kausar F., Shahid S., Zeeshan M., Nawab Y., Riaz R., Memon A.A., Mengal N., Anjum A.S., "Novel derivatives of 3D woven T-shaped composites with improved performance", Journal of the Textile Institute, Vol. 110, No. , (2019), pp.

7

Jabbar M., Karahan M., Nawab Y., Ashraf M., Hussain T., "Effect of silica nanoparticles on mechanical properties of Kevlar/epoxy hybrid composites", Journal of the Textile Institute, Vol. 110, No. , (2019), pp.

8

Umair M., Hamdani S.T.A., Nawab Y., Asghar M.A., Hussain T., Saouab A., "Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites", Fibers and Polymers, Vol. 20, No. , (2019), pp.

9

Karahan M., Karahan N., Nasir M.A., Nawab Y., "Effect of structural hybridization on ballistic performance of aramid fabrics", Journal of Thermoplastic Composite Materials, Vol. 32, No. , (2019), pp.

10

Wassem M., Baig S.A., Abrar M., Hashim M., Zia-Ur-Rehman M., Awan U., Amjad F., Nawab Y., "Impact of Capacity Building and Managerial Support on Employees’ Performance: The Moderating Role of Employees’ Retention", SAGE Open, Vol. 9, No. 3, (2019), pp.3

11

Kashif M., Hamdani S.T.A., Zubair M., Nawab Y., "Effect of interlocking pattern on short beam strength of 3D woven composites", Journal of Composite Materials, Vol. 53, No. , (2019), pp.

12

Shaker, K., Nawab, Y., Saouab, A., "Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings", Engineering Fracture Mechanics, Vol. 218, No. , (2019), pp.

13

Rehman M.M., Zeeshan M., Shaker K., Nawab Y., "Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite", Cellulose, Vol. , No. , (2019), pp.

14

Bajwa, G.A., Nawab, Y., Umair, M., Rizwan, Z., "Techno-mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains", Materialwissenschaft und Werkstofftechnik, Vol. 50(10), No. , (2019), pp.

15

M. Kashif, T. Hamdani, Y. Nawab*, A. Asghar, M. Umair, K. Shaker, "Optimization of 3D woven preform for improved mechanical performance", Journal of Industrial Textiles, Vol. 48, No. , (2019), pp.

2018

16

Ali A., Shaker K., Nawab Y., Jabbar M., Hussain T., Militky J., Baheti V., "Hydrophobic treatment of natural fibers and their composites—A review", Journal of Industrial Textiles, Vol. 47, No. , (2018), pp.

17

Khan M.I., Akram J., Umair M., Hamdani S.T.A., Shaker K., Nawab Y., Zeeshan M., "Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

18

Jabbar M., Nawab Y., Karahan M., Ashraf M., Hussain T., "Mechanical Response of Novel 3D Woven Flax Composites with Variation in Z Yarn Binding", Journal of Natural Fibers, Vol. , No. , (2018), pp.

19

Shaker K., Nawab Y., Ayub Asghar M., Nasreen A., Jabbar M., "Tailoring the properties of leno woven fabrics by varying the structure", Mechanics of Advanced Materials and Structures, Vol. , No. , (2018), pp.

20

Rehman A., Jabbar M., Umair M., Nawab Y., Jabbar M., Shaker K., "A study on the interdependence of fabric pore size and its mechanical and comfort properties", Journal of Natural Fibers, Vol. , No. , (2018), pp.

21

Shaker K., Umair M., Jabbar M., Baitab D.M., Nawab Y., Afzal A., Ahmad S., "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. , No. , (2018), pp.

22

Hussain M., Nawab Y., Rizwan Z., Mumtaz A., Basit A., "Investigation of mechanical properties of auxetic woven polymer composite material: Untersuchung der mechanischen Eigenschaften von auxetisch gewebten Polymer-Verbundwerkstoffen", Materialwissenschaft und Werkstofftechnik, Vol. 49, No. , (2018), pp.

23

Nawab Y., Kashif M., Asghar M.A., Asghar A., Umair M., Shaker K., Zeeshan M., "Development & Characterization of Green Composites Using Novel 3D Woven Preforms", Applied Composite Materials, Vol. 25, No. , (2018), pp.

24

Nasreen A., Umair M., Shaker K., Hamdani S.T.A., Nawab Y., "Development and characterization of three-dimensional woven fabric for ultra violet protection", International Journal of Clothing Science and Technology, Vol. 30, No. , (2018), pp.

25

Ali M., Zeeshan M., Qadir M.B., Riaz R., Ahmad S., Nawab Y., Anjum A.S., "Development and Mechanical Characterization of Weave Design Based 2D Woven Auxetic Fabrics for Protective Textiles", Fibers and Polymers, Vol. 19, No. , (2018), pp.

26

Z. Masood, S. Ahmad, M. Umair, K. Shaker, Y. Nawab, M. Karahan, "Mechanical Behaviour of Hybrid Composites Developed from Textile Waste", Fibres & Textiles in Eastern Europe, Vol. 1(127), No. 26, (2018), pp.26

27

M. Umair, S. Talha, A. Hamdani, M. A. Asghar, T. Hussain, M. Karahan, Y. Nawab, and M. Ali, "Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites", Journal of reinforced plastics and composites, Vol. , No. , (2018), pp.

28

A. Zulifqar, K. Shaker, Y. Nawab, M. Umair, D. M. Baitab, and M. Maqsood, "Investigation of multi-layered woven car seatbelts with optimum performance", Industria Textila, Vol. 68, No. , (2018), pp.

29

M. Hussain, Y.Nawab, Z. Rizwan, A. Basit, "Investigation of Mechanical Properties of Auxetic Woven Polymer Composite Material", Material Science and Engineering Technology, Vol. , No. , (2018), pp.

30

M. Ali, Z. Muhammad, M.B.A. Qadir, S.Ahmad, Yasir Nawab*, "Development and Comfort Characterization of 2D Woven Auxetic Fabric for Wearable and Medical Textile Applications", Clothing and Textile Research Journal, Vol. , No. , (2018), pp.

2017

31

Mumtaz Ali, Yasir Nawab, Abdelghani Saouab, Aima Sameen Anjum, Muhammad Zeeshan, "Fabrication induced spring-back in thermosetting woven composite parts with variable thickness", Journal of Industrial Textiles, Vol. , No. , (2017), pp.

32

Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad, "A Study on the Twist Loss in Weft Yarn During Air Jet Weaving", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2017), pp.

33

Madeha Jabbar, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Optimizing the performance of woven protective gloves using grey relational analysis", Journal of the Textile Institute, Vol. , No. , (2017), pp.

34

Muhammad Umair, Khubab Shaker, Naseer Ahmad, Muzzamal Hussain, Madeha Jabbar, Yasir Nawab, "Simultaneous optimization of woven fabric properties using principal component analysis", Journal of Natural Fibers, Vol. , No. , (2017), pp.

35

Ahmad S., Ashraf M., Ali A., Shaker K., Umair M., Afzal A., Nawab Y., Rasheed A., "Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles", Fibres and Textiles in Eastern Europe, Vol. 25, No. , (2017), pp.

36

K. Shaker, Y. Nawab, A. Saouab, and M. Ashraf, "Effect of silica particle loading on shape distortion in glass / vinyl ester-laminated composite platesg", Journal of the Textile Institute, Taylor & Francis, Vol. , No. , (2017), pp.

37

M. H. Ameer, K. Shaker, M. Ashraf, M. Karahan, Y. Nawab, S. Ahmad, and M. Ali Nasir, "Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre-reinforced composite materials", Journal of the Textile Institute, Taylor & Francis, Vol. 108, No. , (2017), pp.

38

B. Aaboud, A. Saouab, and Y. Nawab, "Simulation of air bubbles creation compression and transport phenomena in resin transfer moulding", Journal of Composite Materials, Vol. 51, No. 29, (2017), pp.29

2016

39

Ashraf, Waqas; Nawab, Yasir; Umair, Muhammad; Shaker, Khubab; Karahan, Mehmet, "Investigation of Mechanical Behavior of Woven / Knitted Hybrid Composites Investigation of Mechanical Behavior of Woven / Knitted Hybrid Composites", The Journal of The Textile Instituteextile institute, Vol. , No. , (2016), pp.

40

K. Shaker, M. Umair, M. Maqsood, Y. Nawab, S. Ahmad, A. Rasheed, M. Ashraf, and A. Basit, "A Statistical Approach For Obtaining The Controlled Woven Fabric Width", Autex Res. J., Vol. 0, No. 0, (2016), pp.0

41

M. Umair, Y. Nawab, and M. H. Malik, "Development and characterization of 3D preforms and their associated composites", J. Reinf. Plast. Compos, Vol. 0, No. 0, (2016), pp.0

42

Liaqat M, Samad HA, Hamdani STA, Nawab Y, "The development of novel auxetic woven structure for impact applications", The Journal of The Textile Institute, Vol. , No. , (2016), pp.

43

Nawab Y, Sonnenfeld C, Saouab A, Agogu� R, Beauch�ne P, "Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in", Journal of Composite Materials, Vol. , No. , (2016), pp.

44

Koyuncu M, Karahan M, Karahan N, Shaker K, Nawab Y, "Static and dynamic mechanical properties of cotton/epoxy green composites", . Fibers Text East Eur, Vol. , No. , (2016), pp.

45

Jabbar A, Militk J, Madhukar Kale B, Rwawiire S, Nawab Y, Baheti V., "Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers", Ind Crops Prod, Vol. , No. , (2016), pp.

46

Shaker K, Jabbar A, Karahan M, Karahan N, Nawab Y, "Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar", J Compos Mater, Vol. , No. , (2016), pp.

47

Umar N, Shaker K, Sheraz A, Nawab Y, "Investigating the mechanical behavior of composites made from textile industry waste", The Journal of The Textile Institute, Vol. , No. , (2016), pp.

48

Nazir MU, Shaker K, Nawab Y, Zohaib M, Khan MI, Umair M, "Investigating the effect of material and weave design on comfort properties of bilayer woven fabrics", J Text Inst, Vol. , No. , (2016), pp.

49

Afzal A, Ahmad S, Rasheed A, Ahmad F, Iftikhar F, Nawab Y, "Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics", Autex Res J, Vol. , No. , (2016), pp.

50

Maqsood M, Hussain T, Ahmad N, Nawab Y, "Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method", J Text Inst, Vol. , No. , (2016), pp.

51

Maqsood M, Khan MI, Shaker K, Umair M, Nawab Y , "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", J Text Inst, Vol. , No. , (2016), pp.

52

Maqsood M, Nawab Y, Shaker K, Umair M, Ashraf M, Baitab DM, et al, "Modelling the Effect of Weave Structure and Fabric Thread Density on Mechanical and Comfort Properties of Woven Fabrics", Autex Res J , Vol. , No. , (2016), pp.

53

Maqsood M, Nawab Y, Umar J, Umair M, Shaker K, "Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments", J Text Inst, Vol. , No. , (2016), pp.

2015

54

Ashraf W., Nawab Y., Maqsood M., Khan H., Awais H., Ahmad S., Ashraf M., Ahmad S., "Development of seersucker knitted fabric for better comfort properties and aesthetic appearance", Fibers and Polymers, Vol. 16, No. , (2015), pp.

55

A. Ali, K. Shaker, Y. Nawab, M. Ashraf, A. Basit, S. Shahid, and M. Umair, "Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material", J. Reinf. Plast. Compos, Vol. , No. 1, (2015), pp.1

56

H. Haji, A. Saouab, and Y. Nawab, "Simulation of coupling filtration and flow in a dual scale fibrous media", Compos. Part A Appl. Sci. Manuf, Vol. 76, No. 1, (2015), pp.1

57

M. Z. Khan, M. Ashraf, T. Hussain, A. Rehman, M. M. Malik, Z. A. Raza, Y. Nawab, and Q. Zia,, "In situ deposition of TiO2 nanoparticles on polyester fabric and study of its functional properties", Fibers Polym, Vol. 16, No. 5, (2015), pp.5

58

M. Maqsood, T. Hussain, M. H. Malik, and Y. Nawab, "Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments", J. Text. Inst, Vol. , No. , (2015), pp.

59

M. Maqsood, Y. Nawab, S. T. A. Hamdani, K. Shaker, M. Umair, and W. Ashraf, "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", J. Text. Inst., Vol. , No. 1, (2015), pp.1

60

Y. Nawab, P. Casari, N. Boyard, V. Sobotka, and F. Jacquemin, "In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup", J. Reinf. Plast. Compos, Vol. , No. 1, (2015), pp.1

61

K. Shaker, M. Ashraf, M. Jabbar, S. Shahid, Y. Nawab, J. Zia, and a. Rehman, "Bioactive woven flax-based composites: Development and characterisation", J. Ind. Text, Vol. , No. 1, (2015), pp.1

62

K. Shaker, Y. Nawab, M. U. Javaid, M. Umair, and M. Maqsood, "Development of 3D woven fabric based pressure switch", Autex Res. J., pp, Vol. , No. 1, (2015), pp.1

63

M. Umair, T. Hussain, K. Shaker, Y. Nawab, M. Maqsood, and M. Jabbar, "Effect of woven fabric structure on the air permeability and moisture management properties", J. Text. Inst, Vol. 0, No. 0, (2015), pp.0

2014

64

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", The Journal of The Textile Institute, Vol. , No. , (2014), pp.

65

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javaid, Khubab Shaker, Muhammad Umair, "Development of seersucker fabrics using single warp beam and modelling of their stretch-recovery behaviour", The Journal of The Textile Institute, Vol. , No. , (2014), pp.

2013

66

Yasir Nawab, Salma Shahid, Nicolas Boyard, Frdric Jacquemin, "Chemical shrinkage characterization techniques for thermoset resins and associated composites", Journal of Materials Science , Vol. 48, No. 16, (2013), pp.16

67

Yasir Nawab,Frdric Jacquemin, Pascal Casari, "Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates", composite Part-B, Vol. 50, No. , (2013), pp.

68

Yasir Nawab, "Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite", Journal of composite Materials, Vol. , No. , (2013), pp.

2012

69

Yasir Nawab, Pascal Casari, Nicolas Boyard, et al, "Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment", Journal of Materials Science, Vol. 48, No. 6, (2012), pp.6

70

Yasir Nawab, Xavier Tardif, Nicolas Boyard, et al, "Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients", Composites Science and Technology, Vol. 73, No. , (2012), pp.

71

Yasir Nawab, Frdric Jacquemin, Pascal Casari et al, "Evolution of chemical and thermal curvatures in thermoset laminated composite plates during the fabrication process", Journal of composite materials, Vol. , No. , (2012), pp.

72

Yasir Nawab, Xavier Legrand, VladanKoncar , "Study of changes in 3D woven multilayer interlock fabric preforms while forming", Journal of textile institute, Vol. , No. , (2012), pp.


2014

1

Yasir Nawab, Chung-Hae Park, et al, "Modeling the residual stress in woven thermoset composites parts for aerospace applications using finite element methods", 5th International symposium on aircraft materials, Venue: Marrakech, Morocco, (2014)

2

Yasir Nawab, Abdul Basit, et al., "Dependence of cure shrinkage of thermoset composite part on the reinforcement type", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

3

Muhammad Maqsood, Yasir Nawab, et al, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

4

Muhammad Umair, Yasir Nawab, et al, "3D shaped woven structures for structural composite application", First International Young Engineers Convention, Venue: Lahore Pakistan, (2014)

5

Khubab Shaker, Yasir Nawab et al, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

6

Adeel Zulfiqar, Tanveer Hussain, Mumtaz Hassan Malik, Abdul Jabbar, Yasir Nawab, "High performance woven fabrics for impact applications", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

7

Muhammad Maqsood, Tanveer Hssain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

8

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

9

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

10

Yasir Nawab, Frdric Jacquemin, Pascal Casari, Nicolas Boyard, Yann Borjon-Piron, Vincent Sobotka, "Modeling the thermal expansion coefficients in the carbon/epoxy laminated composite parts", International conference on COmputational methods in Manufacturing Processes, Venue: Saint-tienne, France, (2014)

2013

11

Yasir Nawab, Nicolas Boyard, et al, "On the characterization of volume and in-plane chemical shrinkage of glass/ vinylester composites", JNC, Venue: France, (2013)

12

Yasir Nawab, Chung-Hae Park, et al, "Modelling of residual stress in thermoset laminated composites", JNC , Venue: Nantes, France, (2013)

13

Yasir Nawab, Chung-Hae Park, et al, "Shape distortion of carbon/epoxy composite parts during fabrication", ROSAM 2013, Venue: Rouen, France, (2013)

14

Yasir Nawab, Frdric Jacquemin, et al. , "Characterization and modeling of cure dependentproperties of thermoset composites Application to the simulation of residual stresses", GDR Week (Mise en uvre des Composites et Proprits Induites), Venue: Albi, France, (2013)

15

Xavier Tardif, Yasir Nawab, et al, "Appareils PVT multifonctionnels : Vers une caractrisation one shot des proprits thermophysiques", GDR Week (Mise en uvre des Composites et Proprits Induites), Venue: Albi, France, (2013)

2012

16

Yasir Nawab, Pascal Casari, et al, "Effet de lorientation des fibres sur la dilatation thermique hors plan de composite stratifi", SF2M , Venue: France, (2012)

17

Xavier Tardif, YasirNawab, et al, "A multifunctional device for polymer/composite characterization", FPCM 12, Venue: Newzealand, (2012)

18

Yasir Nawab, Nicolas Boyard, et al, "Measurement and modelling of chemical shrinkage of thermoset composites", Esaform, Venue: Germany, (2012)

19

Yasir Nawab,FrdricJacquemin, et al, "Shape evolution of carbon epoxy laminated composite during curing", Esaform, Venue: Germany, (2012)

2011

20

Yasir Nawab, Nicolas Boyard, et al , "Measurement of cure shrinkage of thermoset composite by using mould PVT-alpha", 5th COMPTEST, Venue: Switzerland, (2011)

21

Yasir Nawab, Nicolas Boyard, et al , "A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites", 8th IBCAST, Venue: Pakistan, (2011)

2010

22

Yasir Nawab, Xavier Legrand, et al , "Mouldability of 3D Woven Multilayer Interlock Carbon-Epoxy Composites", 7th IBCAST, Venue: Pakistan, (2010)


Book Title Subject Published Year Publisher
Structural Textile Design Interlacing and Interlooping Weaving and Knitting design 2017 CRC, Taylor & Francis Group, USA
Fabric Manufacturing Calculations Process and Product Process and product calculations involved in weaving and knitting 2017 Higher Education Commission, Pakistan
Advanced Textile Testing Techniques Textile Testing 2017 CRC, Taylor & Francis Group, USA
Heat Transfer in Polymer Composite Materials: Forming Processes From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses 2016 ISTE Ltd and John Wiley & Sons, Inc
Textile Engineering: An Introduction Textile 2016 De Gruyter
Etude de moulabilit des composites 3D tisss Textile, 3D weaving 2012 Editions Universitaires Europennes.

2019

1 PhD Composite material solutions for armouring
2 MS/MPhil Investigation of Shape Distortion in Cylindrical Composite Parts
3 MS/MPhil Effect of structural parameters on the puncture resistance of woven fabrics
4 MS/MPhil Effect Of Glass Micro Spheres And Fabric Structure On Mechanical Properties Of Composites
5 MS/MPhil Development and Modelling of Novel 3D Multilayer Auxetic Fabrics for Armoring

2018

6 PhD Study of Particle Loaded Composite Fabrication Using Liquid Composite Moulding Technique
7 PhD Development of novel 3D woven reinforcements for high performance applications

2017

8 MS/MPhil Development and Characterization of 2DWoven Auxetic Fabric for Advance Applications
9 MS/MPhil Development of Thermoplastic Composites for Ballistic Protection
10 MS/MPhil Development and Characterization of Hybrid Composites
11 MS/MPhil Comparison of Mechanical Properties of Bi-Axial and Normal Woven Fabric Reinforced Composites
12 MS/MPhil Development of Explosion Resistant Auxetic Woven Fabrics
13 MS/MPhil Development of Jute Reinforced Hybrid Composite with Improved Mechanical Properties

2016

14 MS/MPhil Ballistic performance of 2D and 3D woven hybrid composites
15 MS/MPhil Effect of stitching on delamination properties of composites
16 MS/MPhil Optimization of weaving pattern of 3D woven structures for improved mechanical performance
17 MS/MPhil Process induced deformation in thermosetting composites
18 MS/MPhil Development and Characterisation of Auxetic Composite Structures
19 MS/MPhil Ageing of natural fibers reinforced composites (Temperature,water/moisture)

2015

20 MS/MPhil Development of machine for 3D weaving of high performance fibers
21 MS/MPhil To Investigate the Mechanical Behavior of Woven/ Knitted Hybrid Composites
22 MS/MPhil 3D woven comingled thermoplastic composites

2014

23 MS/MPhil Development of natural fiber composite with improved strength and antimicrobial activity
24 MS/MPhil Development and characterization of shaped woven multilayer structures and their corresponding composites
25 MS/MPhil Numerical analysis of self-healing composite materials
26 MS/MPhil Reduction in moisture regain of natural fibre composites and studying their ageing properties
27 MS/MPhil Development of a shape memory polymer composite
1
Indigenous Development Of Smart, Safe & Comfortable (S2C) Helmets For Civil And Combat Applications

Awarding Body: Higher Education Commission/ i-Textiles
Awarding Year: 2019
Amount: 16

2
Light weight bullet proof vest made from 3D comingled woven thermoplastic composites and novel auxetic woven fabrics

Awarding Body: Higher Education Commission/ Industry
Awarding Year: 2017
Amount: 14

3
Novel 3D Woven Auxetic Pleated Fabric based Composites for Impact/Shock Absorption

Awarding Body: Higher Education Commission
Awarding Year: 2017
Amount: 4

4
Evaluation and modelling the Residual stresses in thermoset composite to control interlaminar failure

Awarding Body: Higher Education Commission/ Industry
Awarding Year: 2017
Amount: 2.0

5
Development, characterization and modeling of low cost sustainable hybrid composite parts with antimicrobial activity

Awarding Body: Higher Education Commission
Awarding Year: 2016
Amount: 15

6
Development of Eco-Friendly, Energy Efficient, Indigenous Sizing Machine

Awarding Body: Pakistan Science Foundation/ Industry
Awarding Year: 2015
Amount: 3

7
Experimental Investigation and modelling of Mechanical Behavior of Natural Fibers Composite Materials fabricated using local raw materials

Awarding Body: HEC
Awarding Year: 2014
Amount: 1

1
Dice Leadership Award
Dice Foundation USA  (2018)
2
Best University Teacher Award 2016
Higher Education Commission (HEC) Pakistan  (2016)
3
Remarkable PhD Thesis in Science & Technology
Universi de Nantes, France  (2013)
4
Gold Medal
National Textile University  (2005)
  • HEC Approved Ph.D. Supervisor
  • Best PhD Thesis (Thse Remarquable) in science and technology 2012 of Universit de Nantes, France.
  • First position in Master (2009) at ENSAIT (Roubaix)/ENSAM(Paris), France
  • Gold medal (B.Sc. Engineering) in 2004 at National textile university, Pakistan

Regular Member
Materials Research Society

Professional Member
Society of Plastic Engineers (SPE)

Member
American Society for Composites

Registered Engineer
Pakistan Engineering Council

Member
The Institution of Engineers, Pakistan

Member
European Scientific Association for Material Forming (ESAFORM)

Member
Association pour les MatriauxComposites (AMAC)

Registered Expert (Composite Materials)
European Commission (European Research and Innovation)

Member
World Association of Young Scientists