Chunying Min*, Jiejie Huang; Hongyu Liang; Amna Siddique; Zhiwei Xu*, , "Facile fabrication of γ-graphyne/graphitic carbon nitride quantum dots hybrids for enhanced the tribological properties of epoxy resin composites", Polymer Composites, Vol. , No. , (2025), pp.

Xinke Zhou; Shengkai Liu; Amna Siddique*; Chunying Min*; Xiaoyuan Pei; Siqi Liu; Yue Yin; Kun Song; Zhiwei Xu*, , "Construction of nanocomposite interphase with controllable thickness to relieve stress concentration and boost stress transfer from carbon fiber/resin interface", Chemical Engineering Journal,, Vol. , No. , (2025), pp.

Siqi Liu, Shengkai Liu*, Xiaoyuan Pei, Amna Siddique*, Xinke Zhou, Chunying Min*, Zhiwei Xu*, "Effect of unit cell structure and braiding angle on the tribological properties of carbon fiber/epoxy 3D braided composites", Wear, Vol. , No. , (2025), pp.

Amna Siddique, Muhammad Tauseef Khawar, Zhiwei Xu, Chan Choon Kit, Adnan Mazari, Salman Naeem, Jawad Naeem *, Sidra Saleemi,, "Foam dyeing: A review of its potential to reshape sustainable textile processing", Textile Research Journal, Vol. , No. , (2025), pp.

Shengkai Liu, Zhisong Li, jinxia hou, Peiwen Yang, Chunying Min, Siqi Liu, Xiaoyuan Pei, Ruiqi Shao, Amna Siddique*, and Zhiwei Xu, "Graphene quantum dots reducing oxidation behavior and mechanical damage of epoxy resin irradiated by γ-rays", Physical Chemistry Chemical Physics, Vol. , No. , (2025), pp.

Xiaoyuan Pei, Qing Sun, Chunying Min*, Amna Siddique*, Shengkai Liu, Siqi Liu, Kunpeng Lu, Yan Geng, Zhiwei Xu*., "Friction and wear properties of 3D braided carbon fiber/epoxy composites with artistic braiding morphology", Polymer Composites, Vol. , No. , (2025), pp.

Jiankang Wang, Xiaoyuan Pei, Amna Siddique, Shigang Luo, Peng Huang, Jiali Wang, Zhiwei Xu, "Simulation Design and Anchoring Performance Optimization of Multilayer CFRP Plate Anchor", Journal of Materials in Civil Engineering, Vol. , No. , (2025), pp.

Shengkai Liu, Yan Geng, Chunying Minc*, Xiaoyuan Pei, Siqi Liu, Amna Siddique*, Zhiwei Xu*, , "Tribological properties of ultralight and biomimetic helical composites reinforced by low-content carbon fiber from direct ink writing 3D printing", Tribology International, Vol. , No. , (2025), pp.

Amna Siddique, Danish Mahmood Baitab, Muhammad Imran Khan, Muhammad Ayub Asghar, Ali Afzal, Muhammad Umair*, "3D Woven Novel Interlocking Patterns with Enhanced Mechanical and Thermophysical Characteristics", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2025), pp.

Amna Siddique, Jawad Naeem*, Abdul Azeem, Chan Choon Kit, Farooq Rauf, Shengkai Liu*, Zhiwei Xu*, "Mitigating elastane damage in denim stone washing: Effects on Thermal Comfort and Low-Stress Mechanical Performance", Textile Research Journal, Vol. , No. , (2025), pp.

Yue Yin; Shengkai Liu; Xianyan Wu; Dong Liu; Amna Siddique*; Muhammad Umair, Chunying Min; Xinke Zhou; Lei Chen; Chuanbin Yu;Zhiwei Xu, "MOF-based interfacial phase inhibiting structural damage of carbon fiber reinforced polymer composites derived from high-energy irradiation", Composites Part B, Vol. , No. , (2025), pp.

Chunying Min, Zhaolong Sun; Amna Siddique; Hongyu Liang; Zhiwei Xu, "Mechanical-Thermal Synergy in Three-dimensional Graphene-Boron Nitride Dual Networks Enhanced Tribological Property of Epoxy Composites", Friction, Vol. , No. , (2025), pp.

Amna Siddique, Noor Fatima, Zhiwei Xu, Abdul Zahir, Choon Kit Chan, Liu Shengkai, Munir Ashraf*, , "Indigenous preparation of breathable waterproof polyurethane-based coated fabric using surfactant-based system", ACS Omega, Vol. , No. , (2025), pp.

Mengxue Li; Wei Wang; Amna Siddique; Zhiwei Xu,, "Evolution of molecular structure within radial partitions of polyacrylonitrile fibres in irradiation-heat pre-oxidation: a molecular dynamics study", Modelling and Simulation in Materials Science and Engineering, Vol. , No. , (2025), pp.

Zahid Sarwar, Amna Siddique*, Farooq Rauf, Chan Choon Kit, Asim Saeed, Shengkai Liu, Sharjeel Abid, Zhiwei Xu*, , "Evaluating sustainable alternatives to conventional reduction clearing in polyester dyeing", ACS Omega, Vol. , No. , (2025), pp.

Chunying Min *, Yaxiang Su, Hang Yu, Hongyu Liang, Amna Siddique, Zhiwei Xu *, "Constructing the Fluorine-Containing Structures for Excellent Tribological Properties of Degradable Poly(hexahydrotriazine)s", Polymer, Vol. , No. , (2025), pp.

Khubab Shaker, Anas Asim, Ayub Asghar, Madeha Jabbar, Adeela Nasreen, Amna Siddique*, , "DynMechanical Performance of Glass Micro-Spheres Loaded Carbon Fabric Epoxy Composites subjected to Accelerated UV Ageing", Journal of Manufacturing and Materials Processing, Vol. , No. , (2024), pp.

Muhammad Ali Raza, Muhammad Imran Yousaf, Saba Akram, Amna Siddique, Munir Ashraf, D.J. Fu , "High-performance supercapacitor based on NiCo2S4/g-C3N4/polyaniline deposited on carbon cloth for structural stability", Synthetic Metals, Vol. , No. , (2024), pp.

Abdul Salam, Amna Siddique, Muhammad Mubin, Shagufta Riaz, "Cotton fabric coated with functionalized Zn-Doped Fe2O3 NPs for a Visible-Light activated durable Antibacterial, UV-Shielding, and organic degradation. ", Inorganic Chemistry Communications, Vol. , No. , (2024), pp.

Shengkai Liu, Luyao Wang, Amna Siddique, Muhammad Umair, Chongyang Shi, Xiaoyuan Pei, Siqi Liu, Yue Yin, Haiting Shi, Zhiwei Xu,, " Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays", Composites Part B, Vol. , No. , (2024), pp.

Tianshuai Ma, Ruiqi Shao, Amna Siddique, Wei Wang, tianyu Li, Wanwei Jiang, Xiaoyuan Pei, Zhiwei Xu,, "Repairing Surface Defects of Carbon Fibers: Electrostatic Spraying Nano-carbons on Stabilized PAN-Fibers and Subsequent Thermal Annealing", Surfaces and Interfaces, Vol. , No. , (2024), pp.

R.A. Ilyas*, M.R.M. Asyraf, L. Rajeshkumar, Habib Awais, Amna Siddique, Khubab Shaker*, Yasir Nawab, L. Rajeshkumar, Mat Uzir Wahit, "A review of bio-based nanocellulose epoxy composites", Journal of Environmental Chemical Engineering, Vol. 12, No. , (2024), pp.

Cong Shen; Ruiqi Shao; Wei Wang; Xianyan Wu; Baoming Zhou; Lihuan Zhao; Amna Siddique; Zhiwei Xu, , "Research progress of polyurethane foam flame retardant modification,", European Polymer Journal, Vol. 220, No. , (2024), pp.

Zhidong Zhou, Wei Wang, Wenli Li, Ruiqi Shao, Xianyan Wu, Amna Siddique, Sheng kai Liu, and Zhiwei Xu, "Synchronously repairing core/surface defects of carbon fibers by in-situ growth of ZIF-8 and uniquely matched high-energy irradiation", ACS Applied Materials and Interfaces, Vol. 16, No. 39, (2024), pp.39

Amna Siddique, Jawad Naeem, Ang Kiang Long, Zhiwei Xu, Sharjeel Abid, Muhammad Tauseef Khawar*, , "Cinnamon and eucalyptus extracts: A promising natural approach for durable mosquito repellent fabrics with multifunctionality", ACS Omega, Vol. 9, No. 40, (2024), pp.40

Madeha Jabbar, Noor ul Ain, Anaiza Qayyum, Amna Siddique, Muhammad Umair, Khubab Shaker, Yasir Nawab, , "Bio-based thermal insulating panels for clothing using domestic parakeet feathers as filling: a comparative study", Biomass Conversion and Biorefinery, Vol. , No. , (2023), pp.

Khubab Shaker, Muhammad Adnan, Yasir Nawab, Muhammad Umair, Madeha Jabbar, Amna Siddique* and Ahsan Ahmad, , "Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers", Polymers, Vol. 15, No. 18, (2023), pp.18

Zohaib Iqbal, Amna Siddique, Yasir Nawab and Khubab Shaker,, " A comparative static and dynamic behavior of thermoplastic composite joints produced using different joining techniques", Polymer composites, Vol. , No. , (2023), pp.

Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao, "Damage evolution and failure mechanism of three-dimensional braided composite subjected to varied high strain-rate loadings", Textile Research Journal, Vol. , No. , (2022), pp.

Xing Zhong Gao, Muhammad Umair, Yasir Nawab, Zeeshan Latif, Sheraz Ahmad, Amna Siddique* and Hongyue Yang, "Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review", Polymers, Vol. , No. , (2022), pp.

Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao,, "Flexural performance of three-dimensional braided open hole composite with different hole diameter and preform size", Journal of Industrial Textile, Vol. , No. , (2022), pp.

Amna Siddique, Zohaib Iqbal, Yasir Nawab and Khubab Shaker, "A review of joining techniques for thermoplastic composite materials", Journal of Thermoplastic Composite Materials, Vol. , No. , (2022), pp.

Faiza Nazir, Amna Siddique, Ahsan Nazir, Sonia Javed,Tanveer Hussain, Sharjeel Abid, "Eco-friendly dyeing of cotton using waste-derived natural dyes and mordants", Coloration Technology, Vol. , No. , (2022), pp.

Sheraz Ahmad, Munir Ashraf, Sharjeel Abid, Madeha Jabbar, Faizan Shafiq, and Amna Siddique*, "Recent Developments in Laser Fading of Denim: A Critical Review", Journal of natural fibers, Vol. , No. , (2022), pp.

Azmat Hussain, Muhammad Sajid, Danish Iqbal, Muhammad Ilyas Sarwar, Assad Farooq, Amna Siddique*, Muhammad Qamar Khan *, and Ick-Soo Kim*, "Impact of Novel Varietal and Regional Differences on Cotton Fiber Quality Characteristics", Materials, Vol. , No. , (2022), pp.

Muhammad Usman Ghani, Amna Siddique , Kahsay Gebresilassie Abraha, Lan Yao, Wei Li, Muhammad Qamar Khan and Ick-Soo Kim, "Performance Evaluation of Jute/Glass-Fiber-Reinforced Polybutylene Succinate (PBS) Hybrid Composites with Different Layering Configuration", Materials, Vol. , No. , (2022), pp.

Amna Siddique, Tufail hussan, Sharjeel Abid, munir Ashraf, Azmat Hussain, Faizan Shafiq, "The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure", Coatings, Vol. , No. , (2021), pp.

Amna Siddique*, Sharjeel Abid, Faizan Shafiq, Hailou Wang, Baohui Shi, Sidra Saleemi, Baozhong Sun, " Mode I fracture toughness of Carbon/epoxy composites: A review", Journal of Industrial Textile, Vol. , No. , (2021), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Finite element modeling on fracture toughness of 3-D angle-interlock woven carbon/epoxy composites at microstructure level", Mechanics of advanced materials and structures, Vol. , No. , (2021), pp.

Shafiq, Faizan , Amna Siddique, Pervez, Md Nahid , "Extraction of natural dye from aerial parts of argy wormwood based on optimized taguchi approach and functional finishing of cotton fabric", Materials, Vol. , No. , (2021), pp.

Muhammad Aslam, Zulifqar Ali Raza, Amna Siddique, "Fabrication and chemo-physical characterization of CuO/chitosan nanocomposite-mediated tricomponent PVA films", Polymer Bulletin, Vol. , No. , (2020), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, , "Structural influences of 2-D and 3-D woven carbon/epoxy composites on Mode I fracture toughness behaviors with rate effects on damage", Journal of Industrial Textiles, Vol. 50, No. 1, (2020), pp.1

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Influence of braiding angle on multiple impact damages along longitudinal direction", Applied Composite Materials , Vol. 26, No. , (2019), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Effect of pre crack length on Mode I fracture toughness of 3-D angle-interlock woven composites from finite element analyses", Journal of the Textile Institute, Vol. 110, No. 10, (2019), pp.10

Anvarjon Nishonov, Kai Dong, Amna Siddique, Juramirza Kyumov, Baozhong Sun, Bohong Gu, "Temperature and strain rate dependent Impact tensile behaviors of 3D Carbon fiber/Epoxy Angle Interlock woven composites", Scientific and Technical Journal of NamIET, Vol. , No. , (2019), pp.

Chunlei Ren, Amna Siddique, Baozhong Sun, Bohong Gu, "Differences of transverse impact damages in 3D angle-interlock woven composites between warp and weft directions", International Journal of Damage Mechanics, Vol. 28, No. 8, (2019), pp.8

Baohui Shi, Shengkai Liu, Amna Siddique, Junjie Zhang, Bohong Gu, Baozhong Sun, "Comparisons on impact fracture behavior between three-dimensional four directional and five directional braided composite materials", International Journal of Damage Mechanics, Vol. 7, No. , (2019), pp.

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Effect of braiding angle on dynamic mechanical properties of 3-Dbraided rectangular composites under multiple impact compression", Journal of Composite Materials, Vol. 53, No. 13, (2019), pp.13

Baohui Shi, Shengkai Liu, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Impact fracture behaviors of three-dimensional braided composite U-notch beam subjected to three-point bending", International Journal of Damage Mechanics, Vol. , No. , (2019), pp.

Shengkai Liu, Baohui Shi, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials", Journal of Thermal Stresses, Vol. , No. , (2018), pp.

Chunlei Ren, Tao Liu, Amna Siddique, Baozhong Sun, Bohong Gu, "High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts", International Journal of Mechanical Sciences, Vol. , No. , (2018), pp.

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, "Optimization of discharge printing of indigo denim using potassium permanganate via response surface regression", Pigment and Resin Technology, Vol. , No. , (2018), pp.

Sharjeel Abid, Tanveer Hussain, Ahsan Nazir, Zulfiqar Ali Raza, Amna Siddique, Abdul Azeem, Shagufta Riaz, "Simultaneous Fixation of Wrinkle-Free Finish and Reactive Dye on Cotton Using Response Surface Methodology", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.

Hailou Wang, Miao Cao, Amna Siddique, Baozhong Sun, Bohong Gu, "Numerical analysis of thermal expansion behaviors and interfacial thermal stress of 3D braided composite materials", Computational Materials Science, Vol. , No. , (2017), pp.

Zulfiqar Ali Raza, Amna Siddque, Muhammad Mohsin, "Multi-Performance Enhancement of Knitted Wool Fabric with Citric Acid: An Eco-Compatible Cross-Linker", Journal of Natural Fibers , Vol. , No. , (2017), pp.

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, Ahsan Nazir, "Response Surface Optimization in Discharge Printing of Denim Using Potassium Permanganate as Oxidative Agent", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.

Mingling Wang, Miao Cao, Hailou Wang, Amna Siddique, Bohong Gu, Baozhong Sun, "Drop-weight impact behaviors of 3-D angle interlock woven composites after thermal oxidative aging", Composite Structures, Vol. , No. , (2017), pp.