Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao,, "Flexural performance of three-dimensional braided open hole composite with different hole diameter and preform size", Journal of Industrial Textile, Vol. , No. , (2023), pp.

Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao, "Damage evolution and failure mechanism of three-dimensional braided composite subjected to varied high strain-rate loadings", Textile Research Journal, Vol. , No. , (2023), pp.

Muhammad Usman Ghani, Amna Siddique , Kahsay Gebresilassie Abraha, Lan Yao, Wei Li, Muhammad Qamar Khan and Ick-Soo Kim, "Performance Evaluation of Jute/Glass-Fiber-Reinforced Polybutylene Succinate (PBS) Hybrid Composites with Different Layering Configuration", Materials, Vol. , No. , (2022), pp.

Azmat Hussain, Muhammad Sajid, Danish Iqbal, Muhammad Ilyas Sarwar, Assad Farooq, Amna Siddique, Muhammad Qamar Khan , and Ick-Soo Kim, "Impact of Novel Varietal and Regional Differences on Cotton Fiber Quality Characteristics", Materials, Vol. , No. , (2022), pp.

Hafsa Jamshaid, Rajesh Kumar Mishra Naseer Ahmad, Muhammad Nadeem, Miroslav Müller, Viktor Kolář,, " Exploration of graduated compression stocking structures on performance properties by using Principal Component Analysis: a promising way for simultaneous optimization of properties.", Polymers , Vol. , No. , (2022), pp.

Hafsa Jamshaid, N. Ahmad, U. Hussain, R. Mishra, " Parametric optimization of durable sheeting fabric using Taguchi grey relational analysis", Journal of King Saud University - Science , Vol. , No. , (2022), pp.

Muhammad Babar Ramzan, Hafsa Jamshaid, Ismial Usman, and Rajesh Mishra , " Development and Evaluation of Overall Equipment Effectiveness of Knitting Machines Using Statistical Tools", SAGE Open, Vol. , No. , (2022), pp.

Hafsa Jamshaid, Rajput, A. W., Zahid, B., Memon, S., Qureshi, R. F., Aslam, S., & Nadeem, M. , "The effect of basalt knitted fabric on the properties of green epoxy resin. ", Polimery, Vol. , No. , (2022), pp.

Hafsa Jamshaid, Muhammad Nadeem, Allah dad ,Uzair Hussain ,Waqar Ahmad , " Development and Characterization of Socks with Improved Anti-odor, Thermo-regulating and Handle Propertie", Industria Textila , Vol. , No. , (2022), pp.

Hafsa Jmashaid, Mishra, R.K.;Raza, A.; Hussain, U.; Rahman, M.L.;Nazari, S.; Chandan, V.; Muller, M.;Choteborsky, R. , " Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance. ", Materials , Vol. , No. , (2022), pp.

Khalid, Rida, Hafsa Jamshaid, Mishra, Rajesh; Ma, Pibo; Zhu, Guocheng, , " Performance analysis of socks produced by auxetic yarns for protective applications", Journal of Industrial Textiles, Vol. , No. , (2022), pp.

Muhammad Rizwan Tufail , Hafsa Jamshaid , Rajesh Mishra, Uzair Hussain , Martin Tichy and Miroslav Muller, " Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural Applications", Polymers , Vol. , No. , (2022), pp.

Sheraz Ahmad, Munir Ashraf, Sharjeel Abid, Madeha Jabbar, Faizan Shafiq, and Amna Siddique, "Recent Developments in Laser Fading of Denim: A Critical Review", Journal of natural fibers, Vol. , No. , (2022), pp.

Faiza Nazir, Amna Siddique, Ahsan Nazir, Sonia Javed,Tanveer Hussain, Sharjeel Abid, "Eco-friendly dyeing of cotton using waste-derived natural dyes and mordants", Coloration Technology, Vol. , No. , (2022), pp.

Amna Siddique, Zohaib Iqbal, Yasir Nawab and Khubab Shaker, "A review of joining techniques for thermoplastic composite materials", Journal of Thermoplastic Composite Materials, Vol. , No. , (2022), pp.

Xing Zhong Gao, Muhammad Umair, Yasir Nawab, Zeeshan Latif, Sheraz Ahmad, Amna Siddique and Hongyue Yang, "Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review", Polymers, Vol. , No. , (2022), pp.

Amna Siddique, Sharjeel Abid, Faizan Shafiq, Hailou Wang, Baohui Shi, Sidra Saleemi, Baozhong Sun, " Mode I fracture toughness of Carbon/epoxy composites: A review", Journal of Industrial Textile, Vol. , No. , (2021), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Finite element modeling on fracture toughness of 3-D angle-interlock woven carbon/epoxy composites at microstructure level", Mechanics of advanced materials and structures, Vol. , No. , (2021), pp.

Amna Siddique, Tufail hussan, Sharjeel Abid, munir Ashraf, Azmat Hussain, Faizan Shafiq, "The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure", Coatings, Vol. , No. , (2021), pp.

Shafiq, Faizan , Amna Siddique, Pervez, Md Nahid , "Extraction of natural dye from aerial parts of argy wormwood based on optimized taguchi approach and functional finishing of cotton fabric", Materials, Vol. , No. , (2021), pp.

Hafsa Jamshaid , Rajesh Mishra, Muhammad Zeeshan , Bilal Zahid , Sikandar Abbas Basra ,Martin Tichy and Miroslav Muller, " Mechanical Performance of Knitted Hollow Composites from Recycled Cotton and Glass Fibers for Packaging Applications ", Polymers , Vol. , No. , (2021), pp.

Hafsa Jamshaid, Rajesh Mishra, Uzair Hussain, Abdul Waqar Rajput, Martin Tichy & Miroslav Muller , " Natural Fiber Based Antibacterial, Wound Healing Surgical Sutures by the Application of Herbal Antimicrobial Compounds", Journal of Natural Fibers, Vol. , No. , (2021), pp.

Hafsa Jamshaid Uzair Hussain , Rajesh Mishra , Martin Tichy , Miroslav Muller , "Turning textile waste into valuable yarn ", Cleaner Engineering and Technology , Vol. , No. , (2021), pp.

Rajesh Mishra; Hafsa Jamshaid; Sheraz Hussain Siddique Yosfani; Uzair Hussain; Muhammad Nadeem; Michal Petru; Martin Tichy; Miroslav Muller , " Thermo physiological comfort of single jersey knitted fabric derivatives ", Fashion and Textiles , Vol. , No. , (2021), pp.

Hafsa Jamshaid , Rajesh Mishra , Sikandar Basra , Abdul Waqar Rajput , Tufail Hassan d, Michal Petru , Rostislav Choteborsky , and Miroslav Muller , " Lignocellulosic Natural Fiber Reinforced Bisphenol F Epoxy Based Bio-composites: Characterization of Mechanical Electrical Performance ", Journal of Natural fiber, Vol. , No. , (2020), pp.

Zeeshan Ahmad,Hafsa Jamshaid,Yasir Nawab , "Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs", Journal of industrial textiles , Vol. , No. , (2020), pp.

Rajesh Mishra , Hafsa Jamshaid , Sikander Abbas Basra , Gaoming Jiang , Zhe Gao , Pibo Ma , Michal Petru, Ali Raza , and Miroslav Mulle, "Effect of Stitch Characteristics on Flammability and Thermo-Physiological Comfort Properties of Knitted Fabrics", Fibers and Polymers , Vol. , No. , (2020), pp.

Chu, Yao; Jamshaid, Hafsa ; MA, Pibo , "Experimental investigation on shear properties of warp-knitted brush fabrics", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2020), pp.

Muhammad Asim , Ghulam Moeen Uddin , Hafsa Jamshaid , Ali Raza , Zia ul Rehman , Uzair Hussain , Aamir Naseem Satti , Nasir Hayat , Syed Muhammad Arafat , "Comparative experimental investigation of natural fibers reinforced light weight concrete as thermally efficient building materials", Journal of Building Engineering , Vol. , No. , (2020), pp.

Hafsa Jamshaid, Abdul Waqar Rajput, Bilal Zahid Norina Asfand, Sikander Abbas Basra , Amer , "Comparison of functional properties of woven and knitted denim fabrics, ", industria textila, Vol. , No. , (2020), pp.

12. Tufail Hassan , Hafsa Jamshaid , Rajesh Mishra , Muhammad Qamar Khan , Michal Petru , Jan Novak , Rostislav Choteborsky and Monika Hromasova, "Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste", Polymers , Vol. , No. , (2020), pp.

Sikander Abbas Basra, Abdul Waqar Rajput , Bilal Zahid,Norina Asfand,Zeeshan Azam,Hafsa Jamshaid, "Investigations of stretch and recovery properties of knitted socks", industria textile , Vol. , No. , (2020), pp.

Mohammad Irfan , Bilal Zahid , Sheraz Hussain Sidique , Hafsa Jamshaid , Abdul Waqar Rajput & Aiqin Hou To cite this article: Mohammad Irfan , Bilal Zahid, "The effect of degree of curvature and fabric orientation on the impact properties of single and multilayer textile composites ", Journal of the Textile Institute, Vol. , No. , (2020), pp.

Tehseen Ullah, Yasir Nawab, Sheraz Ahmad, "Development of Helical Auxetic Yarn with Negative Poison’s Ratio by Combinations of Different Materials and Wrapping Angle", Journal of Industrial Textiles, Vol. In Press, No. , (2020), pp.

Nauman Ali Choudhry, Abher Rasheed, Sheraz Ahmad, Lyndon Arnold, Lijing Wang, "Design, Development and Characterization of Textile Stitch-Based Piezoresistive Sensors for Wearable Monitoring", IEEE Sensors, Vol. 20, No. 18, (2020), pp.18

Sheraz Ahmad, Karamat Subhani, Abher Rasheed, Munir Ashraf, Ali Afzal, Muhammad Babar Ramzan, Zahid Sarwar, "Development of conductive fabrics by using silver nano Particles for electronic applications", Journal of Electronic Materials, Vol. 49, No. 2, (2020), pp.2

Khurram Shehzad Akhtar, Sheraz Ahmad, Ali Afzal, Wardah Anam, Zulfiqar Ali, Tanveer Hussain, "Influence and comparison of emerging techniques of yarn manufacturing on physical–mechanical properties of polyester-/cotton-blended yarns and their woven fabrics", The Journal of the Textile Institute, Vol. 111, No. 4, (2020), pp.4

Amna Siddique, Baozhong Sun, Bohong Gu, , "Structural influences of 2-D and 3-D woven carbon/epoxy composites on Mode I fracture toughness behaviors with rate effects on damage", Journal of Industrial Textiles, Vol. 50, No. 1, (2020), pp.1

Muhammad Aslam, Zulifqar Ali Raza, Amna Siddique, "Fabrication and chemo-physical characterization of CuO/chitosan nanocomposite-mediated tricomponent PVA films", Polymer Bulletin, Vol. , No. , (2020), pp.

Hafsa Jamshaid,Rajesh Mishra,Sajid Hussain, "Basalt Hybrid Woven Textile Materials for Advanced Thermal Applications", Indian journal of Fiber & Textile Research, Vol. , No. , (2019), pp.

BILAL ZAHID, HAFSA JAMSHAID, ABDUL WAQAR RAJPUT,MOHAMAD FAIZUL YAHYA, SHAKEEL KHATRI, "Effect of cell size on tensile strength and elongation properties of honeycomb weave", industria textila, Vol. 70, No. , (2019), pp.

Zuhaib Ahmad and Brigita Kolčavová Sirková, "Modelling of multifilament woven fabric structure using Fourier series", The Journal of The Textile Institute, Vol. , No. , (2019), pp.

Zuhaib Ahmad and Brigita Kolčavová Sirková, "Analysis of mutual interlacing of threads in multifilament single layer and two layer woven fabric structure using Fourier series", The Journal of The Textile Institute, Vol. , No. , (2019), pp.

Abdelhamid R.R. Aboalasaad, Brigita Kolčavová Sirková and Zuhaib Ahmad, "Influence of Tensile Stress on Woven Compression Bandage Structure and Porosity", AUTEX Research Journal, Vol. , No. , (2019), pp.

Hafiz Shehbaz Ahmad, Hafsa Jamshaid, "Development of thermo-physiologically Comfortable Knit Structure for Sports Application", Tekstil Ve Konfeksiyon, Vol. 29, No. 2, (2019), pp.2

Rashid Masood, Hafsa Jamshaid , Muhammad Anam Khubaib, "Development of knitted vest fabrics for human body thermoregulation", Journal of Thermal Analysis and Calorimetry, Vol. , No. , (2019), pp.

Muhammad Irfan Siyal, Chang-Kyu Lee, Chansoo Park, Aftab Ahmad Khan and Jong-Oh Kim, "A review of membrane development in membrane distillation for emulsified industrial or shale gas wastewater treatments with feed containing hybrid impurities", Journal of Environmental Management, Vol. 243, No. 1 August 2019, (2019), pp.1 August 2019

Aftab Ahmad Khan, Muhammad Irfan Siyal, Chang-Kyu Lee, Chansoo Park, Jong-Oh Kim, "Hybrid organic-inorganic functionalized polyethersulfone membrane for hyper-saline feed with humic acid in direct contact membrane distillation", Separation and Purification Technology, Vol. 210, No. 8 February 2019, (2019), pp. 8 February 2019

Aftab Ahmad Khan, Imtiaz Afzal Khan, Muhammad Irfan Siyal, Chang-Kyu Lee, Jong-Oh Kim, "Optimization of membrane modification using SiO2 for robust anti-fouling performance with calcium-humic acid feed in membrane distillation", Environmental research, Vol. 170, No. March 2019, (2019), pp.March 2019

Zuhaib Ahmad and Brigita Kolčavová Sirková, "Modelling of reinforcement two-layer stitched woven fabric structure intended for composites", The Journal of The Textile Institute, Vol. , No. , (2019), pp.

Muhammad Haris Ameer, Yasir Nawab, Zulfiqar Ali, Abdelatif Imad, Sheraz Ahmad, "Development and characterization of jute/ polypropylene composite by using comingled nonwoven structures", The Journal of the Textile Institute, Vol. 110, No. 11, (2019), pp.11

Ali Afzal, Omer Harzallah, Jean-Yves Drean, Niaz Ahmad, Sheraz Ahmad., "Performance characterization of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Journal of Industrial Textiles, Vol. 48, No. 6, (2019), pp.6

Muhammad Babar Ramzan, Abher Rasheed, Zulfiqar Ali, Sheraz Ahmad, Muhammad Salman Naeem, Ali Afzal, "Impact of wash types and stitching parameters on shrinkage of knitwear made from pique fabric", International Journal of Clothing Science and Technology, Vol. 31, No. 2, (2019), pp.2

Khubab Shaker, Muhammad Umair, Madeha Jabbar, Danish Mehboob Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad., "Effect of Fabric Structural Design on the Thermal Properties of Woven Fabrics", Thermal Science, Vol. 23, No. 5, (2019), pp.5

Wardah Anam, Munir Ashraf, Muhammad Bilal Qadir, Khurram Shehzad Akhtar, Sheraz Ahmad, Ali Afzal, Tehseen Ullah, "Influence of Yarn Manufacturing Techniques on dyeing behavior of Polyester/Cotton Blended Woven Fabrics", Fibres and Polymers, Vol. 20, No. 12, (2019), pp.12

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Influence of braiding angle on multiple impact damages along longitudinal direction", Applied Composite Materials , Vol. 26, No. , (2019), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Effect of pre crack length on Mode I fracture toughness of 3-D angle-interlock woven composites from finite element analyses", Journal of the Textile Institute, Vol. 110, No. 10, (2019), pp.10

Anvarjon Nishonov, Kai Dong, Amna Siddique, Juramirza Kyumov, Baozhong Sun, Bohong Gu, "Temperature and strain rate dependent Impact tensile behaviors of 3D Carbon fiber/Epoxy Angle Interlock woven composites", Scientific and Technical Journal of NamIET, Vol. , No. , (2019), pp.

Chunlei Ren, Amna Siddique, Baozhong Sun, Bohong Gu, "Differences of transverse impact damages in 3D angle-interlock woven composites between warp and weft directions", International Journal of Damage Mechanics, Vol. 28, No. 8, (2019), pp.8

Baohui Shi, Shengkai Liu, Amna Siddique, Junjie Zhang, Bohong Gu, Baozhong Sun, "Comparisons on impact fracture behavior between three-dimensional four directional and five directional braided composite materials", International Journal of Damage Mechanics, Vol. 7, No. , (2019), pp.

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Effect of braiding angle on dynamic mechanical properties of 3-Dbraided rectangular composites under multiple impact compression", Journal of Composite Materials, Vol. 53, No. 13, (2019), pp.13

Baohui Shi, Shengkai Liu, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Impact fracture behaviors of three-dimensional braided composite U-notch beam subjected to three-point bending", International Journal of Damage Mechanics, Vol. , No. , (2019), pp.

Abdul Waqar Rajput, Bilal Zahid, Hafsa Jamshaid, Usman Ali, Amir Abbas, Raja Fahad Qureshi, "Application of Taguchi method to investigate the effect of temperature, heating time, concentration and particle size on improved gel spinning process of UHMWPE", industria textila, Vol. NR 5, No. , (2018), pp.

Muhammad Tayyab Nomana,, Jakub Wienera, Jana Saskovaa, Muhammad Azeem Ashraf,Martina Vikova, Hafsa Jamshaid , Pavel Kejzlar, "In-situ development of highly photocatalytic multifunctional nanocomposites by ultrasonic acoustic method", Ultrasonics - Sonochemistry , Vol. 40, No. , (2018), pp.

Muhammad Tayyab Noman Jiri Militky , Jakub Wiener , Jana Saskova , Muhammad Azeem Ashraf, Hafsa Jamshaid , Musaddaq Azeem , "Sonochemical synthesis of highly crystalline photocatalyst for industrial applications", Ultrasonics, Vol. 83, No. 7, (2018), pp.7

Musaddaq Azeem, Zuhaib Ahmad, Jakub Wiener, Ahmad Fraz, Hafiz Faisal Siddique, Antonin Havalka, "Influence of Weave Design and Yarn Types on Mechanical and Surface Properties of Woven Fabric", FIBRES & TEXTILES in Eastern Europe, Vol. 127, No. 1, (2018), pp.1

Muhammad Tayyab Noman, Muhammad Azeem Ashraf, Hafsa Jamshaid, and Azam Ali, "A Novel Green Stabilization of TiO2 Nanoparticles onto Cotton”, Fibers and Polymers", Fibers and Polymers, Vol. 19, No. 11, (2018), pp.11

Waseem Ibrahim, Zahid Sarwar, Asfandyar Khan, Ali Hassan, Abdul Azeem,Ahsan Nazir, Hafsa Jamshaid & Uzair Hussain, "A novel study of comparison properties of pigment and reactive dye printed cotton fabric", Journal of Natural Fibers , Vol. , No. , (2018), pp.

Hafsa Jamshaid,Rajesh Mishra,jiri Milikitky,Tanveer Hussain, "Analysis of Basalt and Thermoplastic Hybrid composites", Journal of Fibre Bioengineering and Informatics , Vol. , No. , (2018), pp.

Zuhaib Ahmad, Moaz Eldeeb, Shoaib Iqbal, Adnan Mazari , "Effect of yarn structure on cover factor in woven fabrics", Industria Textila, Vol. 69, No. 3, (2018), pp.3

Zuhaib Ahmad, Brigita Kolčavova Sirkova, Sheraz Ahmad, Muhammad Salman Naeem, Syed Zameer Hassan, "Effect of material and stitching on tensile properties of woven fabrics", IOP Conference Series: Materials Science and Engineering, Vol. 414, No. 1, (2018), pp.1

Muhammad Salman Naeem, Syed Zameer Hassan, Zafar Javed, Babar Ramzan, Abher Rasheed, Zuhaib Ahmad, Saima Javed, "Electromagnetic shielding effectiveness of high loft activated carbon web prepared by using acrylic waste", IOP Conference Series: Materials Science and Engineering, Vol. 414, No. 1, (2018), pp.1

Muhammad Irfan Siyal, Aftab Ahmad Khan, Chang-Kyu Lee, Jong-Oh Kim, "Surface modification of glass fiber membranes by fluorographite coating for desalination of concentrated saline water with humic acid in direct-contact membrane distillation", Separation and Purification Technology, Vol. 205, No. October 2018, (2018), pp.October 2018

Muhammad Irfan Siyal, and Jong-Oh Kim, "Fluorographite-co-polydimethylsiloxane coated polyvinylidene-fluoride membrane for desalination of highly saline water with humic acid in direct contact membrane distillation", Environmental research, Vol. 167, No. November 2018, (2018), pp.November 2018

F Ahmad, Z Ulker, C Erkey, "A novel composite of alginate aerogel with PET nonwoven with enhanced thermal resistance", Journal of non-crystalline solids, Vol. , No. , (2018), pp.

F Ahmad, M Tausif, MZ Hassan, S Ahmad, MH Malik, "Mechanical and comfort properties of hydroentangled nonwovens from comber noil", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

Mumtaz Ali, Muhammad Zeeshan, Sheraz Ahmad, Bilal Qadir, Yasir Nawab, Aima Sameen Anjum, Rabia Riaz, "Development and mechanical characterization of weave design based 2D woven auxetic fabrics for protective textiles ", Fibres and Polymers , Vol. 19, No. 11, (2018), pp.11

Mumtaz Ali, Muhammad Zeeshan, Sheraz Ahmad, Bilal Qadir, Yasir Nawab, Aima Sameen Anjum, Rabia Riaz, " Development and Comfort Characterization of 2D-Woven Auxetic Fabric for Wearable and Medical Textile Applications ", Clothing and Textiles Research Journal, Vol. 36, No. (3) , (2018), pp.(3)

A. Rasheed, Sheraz Ahmad, Nauman Ali, Ateeq ur Rehman, Muhammad Babar Ramzan., "Geometrical Model to Calculate the Consumption of Sewing Thread for 504 Over-edge Stitch", The Journal of the Textile Institute, Vol. 109, No. 11, (2018), pp.11

Khurram Shehzad Akhter, Ali Afzal, Kashif Iqbal, Zahid Sarwar, Sheraz Ahmad, "Investigation of Manufacturing and Processing Techniques on Shade Variation and Performance Characteristics of Woven Fabrics", Journal of Engineered Fibre and Fabrics, Vol. 13, No. 3, (2018), pp.3

Azam Ali, Nhung H. A. Nguyen, Vijay Baheti, Munir Ashraf, Jiri Militky, Tariq Mansoor, Muhammad Tayyab Noman, Sheraz Ahmad, "Electrical Conductivity and Physiological Comfort of Silver Coated Cotton Fabrics", The Journal of the Textile Institute, Vol. 109, No. 5, (2018), pp.5

Zaid Masood, Sheraz Ahmad, Muhammad Umair, Khubab Shaker, Yasir Nawab, Mehmet Karahan, "Mechanical behaviour of hybrid composites developed from textile waste", Fibres and Textiles in Eastern Europe, Vol. 26, No. 1(127), (2018), pp.1(127)

Shengkai Liu, Baohui Shi, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials", Journal of Thermal Stresses, Vol. , No. , (2018), pp.

Chunlei Ren, Tao Liu, Amna Siddique, Baozhong Sun, Bohong Gu, "High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts", International Journal of Mechanical Sciences, Vol. , No. , (2018), pp.

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, "Optimization of discharge printing of indigo denim using potassium permanganate via response surface regression", Pigment and Resin Technology, Vol. , No. , (2018), pp.

Ali Afzal, Sheraz Ahmad, Abher Rasheed, Muhammad Mohsin, Faheem Ahmad, Yasir Nawab, "Characterization and modelling of thermal resistance of Cotton/Polyester Blended Double Layer Interlock Knitted Fabrics", Thermal Science, Vol. 21, No. 6, (2017), pp.6

Ali Afzal, Sheraz Ahmad, Abher Rasheed, Faheem Ahmad, Fatima Iftikhar, Yasir Nawab., "Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics", Autex Research Journal, Vol. 17, No. 1, (2017), pp.1

Muhammad Umar Nazir, Khubab Shaker, Sheraz Ahmad, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, "Investigating the mechanical behavior of composites made from textile industry waste", Journal of the Textile Institute, Vol. 108, No. 5, (2017), pp.5

Ali Afzal, Jean-Yves Drean, Omar Harzallah, Nabyle Khenoussi Sheraz Ahmad, Niaz Ahmad., "Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Textile Research Journal, Vol. 87, No. 16, (2017), pp.16

Rajesh Mishra, Hafsa Jamshaid, & Jiri Militky, "Basalt nanoparticle reinforced hybrid woven composites: Mechanical and thermo-mechanical performance in Fibers and Polymers", Journal of the Textile Institute, Vol. 18(12), No. , (2017), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiř� Militk� & Muhammad Tayyab Noman, "Interfacial performance and durability of textile reinforced concrete", Journal of the Textile Institute, Vol. , No. , (2017), pp.

S. Hussain, V. Glombikova, A. Havelka, H. Jamshaid, S.S. Batool and M.Z. Khan , "Moisture Transport Phenomena of Functional Underwears", Fibers & Textile , Vol. 2, No. , (2017), pp.

Hafsa Jamshaid , "Basalt Fiber and its Applications", Textile Engineering & Fashion Technology, Vol. 6, No. , (2017), pp.

Rajesh Mishra, Hafsa Jamshaid & Jiri Militky, "Investigation of Mechanical Properties of Basalt Woven Fabrics by Theoretical and Image Analysis Methods", Fiber and Polymers , Vol. 18, No. 7, (2017), pp.7

Veera kumar, Rajesh Mishra, Jana Salacova, Mohanapriya Venkatraman, Dana Kremenakova,Jiri Militky , Hafsa Jamshaid , "Functiona; Characteristics evalauation of 3 D dimensional knitted spacer fabrics", Vlakna Textiles , Vol. 1, No. , (2017), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky and Veronika Safarova, "Investigation of electrical properties of basalt and its hybrid structures", Textile Research , Vol. 87, No. 6, (2017), pp.6

Zuhaib Ahmad & Brigita Kolčavova Sirkova, "Tensile behavior of Basalt and Glass single layer and multilayer woven fabrics", The Journal of The Textile Institute, Vol. 109, No. 5, (2017), pp.5

Shoaib Iqbal, Moaz Eldeeb, Zuhaib Ahmad , Adnan Mazari, "Comparative study on yarn and knitted fabric made from Open end and Rieter airjet spun system", Tekstil ve Konfeksiyon, Vol. 27, No. 3, (2017), pp.3

Asif Elahi Mangat, Lubos Hes, Vladimir Bajzik, Zuhaib Ahmad, "Influence of air flow direction on thermal resistance and water vapor permeability of Rib knit fabrics", TEKSTİL ve KONFEKSİYON, Vol. 27, No. 1, (2017), pp.1

Munir Ashraf, Muhammad Irfan Siyal, Ahsan Nazir, Abdur Rehman, "Single-step antimicrobial and moisture management finishing of PC fabric using ZnO nanoparticles", Autex Research Journal, Vol. 17, No. 3, (2017), pp.3

Muhammad Irfan Siyal, Chang Kyu Lee, Jong Oh Kim, "Degradation of humic acid by ZVI based sono-fenton as a pretreatment for reducing organic fouling likely in membrane distillation", Desalination and Water Treatment, Vol. 99, No. , (2017), pp.

Muhammad Irfan Siyal, Chang Kyu Lee, Aftab Ahmad Khan, Chansoo Park, Jong Oh Kim, "TOC reduction using Fenton and sono-Fenton process as membrane distillation pretreatment", Desalination and Water Treatment, Vol. 77, No. , (2017), pp.

A Afzal, S Ahmad, A Rasheed, M Mohsin, F Ahmad, Y Nawab, "Characterization and statistical modelling of thermal resistance of cotton/polyester blended double layer interlock knitted fabrics", Thermal Science , Vol. , No. , (2017), pp.

Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad, "A Study on the Twist Loss in Weft Yarn During Air Jet Weaving", Journal of Engineered Fibre and Fabrics, Vol. 12, No. 4, (2017), pp.4

Muhammad Haris Ameer, Khubab Shaker, Munir Ashraf, Mehmet Karahan, Sheraz Ahmad, Muhammad Ali Nasir, Yasir Nawab, "Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre reinforced composite materials", The Journal of the Textile Institute, Vol. 108, No. 10, (2017), pp.10

Sheraz Ahmad, Munir Ashraf, Azam Ali, Khubab Shaker, Muhammad Umair, Ali Afzal, Yasir Nawab, Abher Rasheed, "Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver & Copper Nanoparticles", Fibres and Textiles in Eastern Europe, Vol. 25, No. 5(125), (2017), pp.5(125)

Sharjeel Abid, Tanveer Hussain, Ahsan Nazir, Zulfiqar Ali Raza, Amna Siddique, Abdul Azeem, Shagufta Riaz, "Simultaneous Fixation of Wrinkle-Free Finish and Reactive Dye on Cotton Using Response Surface Methodology", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.

Hailou Wang, Miao Cao, Amna Siddique, Baozhong Sun, Bohong Gu, "Numerical analysis of thermal expansion behaviors and interfacial thermal stress of 3D braided composite materials", Computational Materials Science, Vol. , No. , (2017), pp.

Zulfiqar Ali Raza, Amna Siddque, Muhammad Mohsin, "Multi-Performance Enhancement of Knitted Wool Fabric with Citric Acid: An Eco-Compatible Cross-Linker", Journal of Natural Fibers , Vol. , No. , (2017), pp.

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, Ahsan Nazir, "Response Surface Optimization in Discharge Printing of Denim Using Potassium Permanganate as Oxidative Agent", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.

Mingling Wang, Miao Cao, Hailou Wang, Amna Siddique, Bohong Gu, Baozhong Sun, "Drop-weight impact behaviors of 3-D angle interlock woven composites after thermal oxidative aging", Composite Structures, Vol. , No. , (2017), pp.

Rashid Masood, Azeem Ullah, Tanveer Hussain, Tanzeel Areeb, Muhammad Umar, Zulfiqar Ali Raza and Mohsen Miraftab, "Novel Alginate, Chitosan and Psyllium composite fiber for woundcare applications", Journal of Industrial Textile, Vol. , No. , (2016), pp.

Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab , "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", Journal of the Textile Institute , Vol. , No. , (2016), pp.

Muhammad Mohsin , Nasir Sarwar, Sheraz Ahmad, Abher Rasheed, Faheem Ahmad, Ali Afzal, Muhammad Sohail Zafar., "Maleic acid crosslinking of C-6 fluorocarbon as oil and water repellent finish on cellulosic fabrics", Journal of Cleaner Production, Vol. 112, No. 4, (2016), pp.4

Zulfiqar Ali. Raza, Fiaza Anwar, Sheraz Ahmad, Muhammad Aslam., "Fabrication of ZnO incorporated chitosan nanocomposites for enhanced functional properties of cellulosic fabric", Materials Research Express, Vol. (In Press), No. , (2016), pp.

*Muzammil Mehmood, Shahid Raza Malik, Rashid Masood , Farhan Iqbal, "DEVELOPMENT AND ABSORBENCY CHARACTERIZATION OF HONEY COATED ALCHITE FIBERS FOR BURN WOUND DRESSINGS", Science International, Vol. 28, No. 2, (2016), pp.2

Rashid Masood, Tanveer Hussain,Mohsen Miraftab, Azeem Ullah, Zulfiqar Ali Raza, Tanzeel Areeb, Muhammad Umar,, "Novel alginate, chitosan, and psyllium composite fiber for wound-care applications", Journal of Industrial Textiles, Vol. , No. , (2016), pp.

SHUMAILA HAMEED,* MUHAMMAD AJAZ HUSSAIN,* RASHID MASOOD** and MUHAMMAD TAHIR HASEEB, "Cross-linking of cotton fabric using maleic anhydride and sodium hypophosphite", Cellulose Chemistry and Technology , Vol. 50, No. 2, (2016), pp.2

ASFANDYAR KHAN1,*, MD. NAHID PERVEZ1 , IMRAN AHMAD KHAN , SHABEER AHMAD , RASHID MASOOD , TANVEER HUSSAIN and FELIX TELEGIN, " New Approach of Phase Change Material Encapsulation through in situ Polymerization to Improve Thermo-Regulating Property of Cellulose", Asian Journal of Chemistry, Vol. 28, No. 6, (2016), pp.6

2. Zulfiqar Ali Raza, Aisha Rehman, Rashid Masood,, "Polyurethane based finishing of cotton fabric for imparting multifunctional properties by using central composite design", Pigment and Resin Technology, Vol. 45, No. 6, (2016), pp.6

Tanveer Hussain, Rashid Masood, Muhammad Umar , Tanzeel Areeb , Azeem Ullah, "Development and characterization of alginate-chitosan-hyaluronic acid (ACH) composite fibers for medical applications", Fibers and Polymers , Vol. 17, No. 11, (2016), pp.11

Hafsa Jamshaid, Rajesh Mishra , "A green material from Rock : A basalt fiber", Journal of the Textile Institute, Vol. 107(7), No. , (2016), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky, Miroslava Pechociakova, Muhammad Tayyab Noman, "Mechanical, �Thermal and Interfacial Properties of Green Composites from Basalt and Hybrid Woven Fabrics", Fibers and Polymers, Vol. 17( 10), No. , (2016), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky , "Analysis of Mechanical Properties of Basalt hybrid woven fabrics", Journal of Fiber Bioengineering and Informatics , Vol. 9(3), No. , (2016), pp.

Hafsa Jamshaid, Rajesh Mishra and Jiri Militky, "�Thermo-Mechanical Characteristics of Basalt Hybrid & Non-hybrid Woven Fabric Reinforced Composites�", Polymer Composites, Vol. 37(10), No. , (2016), pp.

Zuhaib Ahmad, Brigita Kolčavova Sirkova and Moaz Eldeeb, "Yarn cross-sectional deformation in woven fabric", Vlakna a Textil, Vol. 23, No. 4, (2016), pp.4

Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad., "Development of Seersucker Knitted Fabric for Better Comfort Properties and Aesthetic Appearance", Fibres and Polymers , Vol. (In Press), No. , (2015), pp.

Sheraz Ahmad, Faheem Ahmad, Ali Afzal, Abher Rasheed, Muhammad Mohsin , Niaz Ahmad , "Effect of weave structure on thermo-physiological properties of cotton fabrics", AUTEX Research Journal , Vol. 15, No. 1, (2015), pp.1

Muhammad Awais, Muhammad Tausif, Faheem Ahmad, Abdul Jabbar, Sheraz Ahmad, "Inclusion of Recycled PPTA Fibre in Development of Cut-resistant Gloves", Journal of the Textile Institute, Vol. 106, No. 4, (2015), pp.4

Muhammad Tausif, Faheem Ahmad, Uzair Hussain, Abdul Basit, Tanveer Hussain , "A comparative study of mechanical and comfort properties of bamboo viscose as an eco-friendly alternative to conventional cotton fibre in polyester blended knitted fabrics", Journal of Cleaner Production, Vol. 89, No. , (2015), pp.

M Awais, M Tausif, Faheem Ahmad, Abdul Jabbar & Sheraz Ahmad, "Inclusion of recycled PPTA fibre in development of cut resistant gloves", Journal of Textile Institute, Vol. 106, No. 04, (2015), pp.04

Sheraz Ahmad, Faheem Ahmad, Ali Afzal, Abher Rasheed, Muhammad Mohsin , Niaz Ahmad, "Effect of Weave Structure on Thermo-Physlological Properties of cotton fabrics", AUTEX Research Journal, Vol. In Press, No. , (2015), pp.

Tanveer Hussain, Azeem Ullah, Muhammad Umar, Tanzeel Areeb, Rashid Masood and Qasim Zia, "Modeling the properties of pigment printed polypropylene nonwoven fabric by Box Behnken (RSM) technique", Coloration Technology, Vol. 137, No. , (2015), pp.

Muhammad Maqsood, Tanveer Hussain, Mumtaz Hasan Malik, Yasir Nawab , "Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments", Journal of the Textile Institute , Vol. 107, No. 3, (2015), pp.3

Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf , "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", Journal of the Textile Institute , Vol. , No. , (2015), pp.

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid , "Modeling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex Research Journal , Vol. , No. , (2015), pp.

Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad , "Development of seersucker knitted fabrics for better comfort properties and aesthetic appearance", Fibers and Polymers , Vol. , No. , (2015), pp.

Jawairia Umar, Tanveer Hussain, Muhammad Maqsood, "Modeling the mechanical and compression properties of polyamide/elastane knitted fabrics for compression sportswear ", Journal of the Textile Institute , Vol. , No. , (2015), pp.

Syed Talha Ali Hamdani, Anura Fernando, Muhammad Maqsood , "Thermo-mechanical behavior of stainless steel knitted structures", Heat and Mass Transfer Journal, Vol. , No. , (2015), pp.

Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar , "Effect of woven fabric structure on the air permeability and moisture management properties", Journal of the Textile Institute , Vol. , No. , (2015), pp.

Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit , "A statistical approach for obtaining the controlled woven fabric width", Autex Research Journal , Vol. , No. , (2015), pp.

Khubab Shaker, Yasir Nawab, Muhammad Usman Javed, Muhammad Umair, Muhammad Maqsood , "Development of 3D woven fabric based pressure switch ", Autex Research Journal , Vol. , No. , (2015), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky and Jan Novak, "�End use performance characterization of unconventional knitted fabrics�", Fibers and Polymers , Vol. 16 (11), No. , (2015), pp.

Hafsa Jamshaid, Rajesh Mishra, Jiř� Militk�, "�Thermal and mechanical characterization of novel basalt woven hybrid structures�", Journal of the Textile Institute, Vol. 107 (4), No. , (2015), pp.

U Hussain, S Irshad, W Anam, H Abbasi, F Ahmed, A Jabbar, "Effect of Different Conditioning Methods on the Properties of Hosiery Yarn and Knitted Fabric", Journal of Engineered Fibers and Fabrics , Vol. , No. , (2015), pp.

U Hussain, FB Younis, F Usman, T Hussain, F Ahmed, "Comfort and Mechanical Properties of Polyester/Bamboo and Polyester/cotton Blended Knitted fabric", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2015), pp.

Ali Afzal, Tanveer Hussain, Muhammad Mohsin, Abher Rasheed, Sheraz Ahmad, "Statistical models for predicting the thermal resistance of polyester/cotton blended interlock knitted fabrics", International Journal of Thermal Sciences, Vol. 85, No. , (2014), pp.

Muhammad Mohsin, Umar Farooq, Naveed Ramzan, Abher Rasheed, Sheraz Ahmad, Muhammad Ahsan, "Softener impact on environment friendly low and zero formaldehyde cross-linker performance for cotton", Industria Textila , Vol. 65, No. 3, (2014), pp.3

Abher Rasheed, Sheraz Ahmad, Muhammad Mohsin, Faheem Ahmad, Ali Afzal, "Geometrical model to calculate the consumption of sewing thread for 301 lockstitch", Journal of the Textile Institute , Vol. 105, No. 12, (2014), pp.12

Ali Afzal, Tanveer Hussain, Mumtaz Hassan Malik, Abher Rasheed, Sheraz Ahmad, Abdul Basit, Ahsan Nazir, "Investigation and modeling of air permeability of Cotton/Polyester blended double layer interlock knitted fabrics", Fibres and Polymers, Vol. 15, No. 7, (2014), pp.7

Ahsan Nazir, Tanveer Hussain, Faheem Ahmad, Sajid Faheem, "Effect of Knitting Parameters on Moisture Management and Air Permeability of Interlock", Autex Research Journal, Vol. 14, No. 1, (2014), pp.1

M Bilal Qadir, Tanveer Hussain, Mumtaz Malik, Faheem Ahmad & Sung Hoon Jeo, "Effect of Elastane Denier and Draft Ratio on the Physical and Mechanical Properties of Core-Spun Cotton Yarns", Journal of Textiles Institute, Vol. 105, No. 7, (2014), pp.7

Abdul Jabbar, Shakeel Ahmad, Tanveer Hussain, Noman Haleem & Faheem Ahmad , "Statistical model for prediction of air consumption on air jet loom", Journal of Engineered Fibers and Fabrics, Vol. vol. 9, No. 3, (2014), pp.3

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javed, Khubab Shaker, Muhammad Umair , "Development of seersucker fabrics using single beam and modeling of their stretch-recovery behavior", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair , "Prediction of warp and weft yarn crimp in cotton woven fabrics", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

Hafsa Jamshaid, Rajesh Mishra, "Photoilluminance of different woven structures by treatment with phosphorescent pigment", Fibers and Polymers, Vol. 15(5), No. , (2014), pp.

Hafsa Jamshaid ,Tanveer Hussain, Ateeb Sohail, "Reducing defects in textile weaving by applying Six Sigma methodology: a case study", Int. J. of Six Sigma and Competitive Advantage, Vol. Vol.8, No.2, No. , (2014), pp.

U Hussain, A Sarwar, AR Shafqat, M Muzaffar, M Iqbal, N Zahra, F Ahmad, T Hussain , "Effect of spinning variables on packing density of 100% cotton yarn", Indian Journal of Fibers & Textile Research, Vol. , No. , (2014), pp.

Hafsa Jamshaid, Tanveer Hussain, Zulfiqar Ali Malik, "� Comparison of regression and adaptive neuro-fuzzy models for predicting the bursting strength of plain knitted fabrics�", Fibers and Polymers , Vol. 14(7), No. , (2013), pp.

Sheraz Ahmad, Artan Sinoimeri, Shahram Nowrouzieh, "The Effect of the Sliver Fibre Configuration on the Cotton Inter-fibre Frictional Forces", Journal of Engineered Fibre and Fabrics , Vol. 7, No. , (2012), pp.

Hafsa Jamshaid/Riaz, "Crisis of Pakistan Textile Industry", Journal of the institute of Engineers, Pakistan, Vol. , No. , (2010), pp.

Hafsa Jamshaid/Riaz , "Electronic Textiles and its applications", Pakistan Textile Journal, Vol. , No. , (2009), pp.

Hafsa Jamshaid/Riaz , "Engineers, Future of Pakistan", Journal of the Institute of Engineers, Pakistan, Vol. , No. , (2009), pp.

Sheraz Ahmad, Iftikhar Ahmad, Sajjad Ahmad Baig , "The Effect of Nipper Guage and Drafting Zone Guages at Combing Machine on Yarn Quality Parameters", Journal of Quality and Technology Management , Vol. IV, No. 1, (2008), pp.1

Dr. Tanveer Hussain and Mohammad Bilal, "Critical characteristics of cotton that affect yarn quality in Ring spinning", Pakistan Textile Journal, Vol. LVII , No. 5, (2008), pp.5

Hafsa Jamshaid/Riaz, "Energy saving and conservation measures", Pakistan Textile Journal, Vol. , No. , (2008), pp.

Invited speaker, "Mineral fiber: Basalt, ,Future of composites", 4th NED international textile conference , Venue: ,Karcahi, Pakistan., (2020)

Guest speaker, "Ray of hope: Harnessing the Solutions for Pandemic", Innovation Summit 2020., Venue: online, (2020)

Sheraz Ahmad, Muhammad Haris Ameer, Yasir Nawab, Zulfiqar Ali, "Development & Characterization of Helical Auxetic Yarn by Wrapping Method", 2nd International Conference on Technical Textiles, Venue: NTU Faisalabad, (2020)

Ziauddin, Tahseen Ullah, Faheem Ahmad, Sheraz Ahmad, "INFLUENCE OF TRI-BLEND YARNS ON THERMOPHYSIOLOGICAL COMFORT OF WOVEN FABRICS", 2nd International Conference on Technical Textiles, Venue: NTU Faisalabad, (2020)

Zuhaib Ahmad, Birgita Kolcavova Sirková, Sheraz Ahmad and M. Salman Naeem, "Application of Fourier series to analyze the deformation of yarn in multifilament double layer woven structures", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: National Textile University, Faisalabad, Pakistan, (2019)

Muhammad Nauman Hameed, Yasir Nawab, Khubaib Shakir, Muhammad Zubair, Zuhaib Ahmad and M. Salman Naeem, "Effect of structural parameters on the puncture resistance of Kevlar woven fabrics", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: National Textile University, Faisalabad, Pakistan, (2019)

Hafsa Jamshaid ,Ali Raza, Sikander Abbas Basra, Rajesh Mishra, "Development Of Thermally Insulated Construction Structure By Sustainabe Natural Fibers", 47th Textile research Symposium,, Venue: Czeck Republic, (2019)

Hafsa Jamshaid, Uzair Hussain, Haritham Khan, Rajesh Mishra, "Development Of Comfortable Motorcyclist Gloves From Recycled Ppta", Autex, Venue: Ghent, (2019)

Hafsa Jamshaid, Zeeshan Azeem, Sikander Abbas Basra,Uzair Hussain1,Rajesh Mishra, " Development Of Shoe Insole With Natural Fibres", 4th ICNF, Venue: Portugal, (2019)

Invited speaker Hafsa Jamshaid, , "Textile reinforced Concrete (TRC)", Academic- Network-PM’s Naya Pakistan Housing Program, Venue: NED, Karachi,Pakistan, (2019)

Invited speaker Hafsa Jamshaid, “Influence of Structure on flame resistant and comfort properties” International conference Eco-textiles & young scholar forum (ICET 2019) 4-6th August at Jiangnan University in Wuxi, China., "Influence of Structure on flame resistant and comfort properties", International conference Eco-textiles & young scholar forum (ICET 2019), Venue: Jiangnan University in Wuxi, China., (2019)

Ali Raza, Hafsa Jamshaid, Uzair Hussain, Usman Ahmed, , "Study of energy efficient wall materials for buildings", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: Pakistan, (2019)

Zeeshan Azam, Norina Asfand, Hafsa Jamshaid, Sikander Abbas Basra, Usman Ahmed , " Fabrication of reinforcement for knitted thermoplastic composites", 5th International Conference on Value Addition & Innovation in Textiles(COVITEX), Venue: Pakistan, (2019)

Usman Ahmed, Dr. Hafsa jamshaid, Ali Raza, Sikander Abbas, Norina Asfand, Zeeshan, , "Investigation of lightweight knitted structure for sportswear garment", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: Pakistan, (2019)

Hafsa Jamshaid, "Green application of hybrid basalt /jute fiber in automotive application", ICBFC 2019, Venue: China, (2019)

F. Ahmad and C. Erkey, "Flexible alginate aerogel fibers for textiles", 17th European Meeting on Supercritical Fluids-7th European Meeting on High Pressure Technology, Venue: Spain, (2019)

keynote speaker , "Sustainable textiles", 1st china-CECs Symposium on Advance fiber/textile materials , Venue: Zhejiang Sci tech university,Hangzhou,China., (2019)

Sheraz Ahmad and Abher Rasheed, "Development and Characterization of Functional Composite Membrane for Anti-bacterial and reducing Fouling Problem", 5th International Conference on Value Addition and Innovation in Textile – COVITEX, Venue: NTU Faisalabad, (2019)

Sheraz Ahmad, Muhammad Haris Ameer, Yasir Nawab, Zulfiqar Ali, "Effect of chemical treatments on mechanical and moisture properties of jute reinforced polyester composites", 5th International Conference on Value Addition and Innovation in Textile – COVITEX, Venue: NTU Faisalabad, (2019)

M. Salman Naeem, Zafar Javed, Abher Rasheed, Babar Ramzan, Zuhaib Ahmad, Hafiz Affan Abid, "Removal of Acid Red from Aquous Media using Activated Carbon from Acrylic waste", Emerging Trends in Knitting, Venue: National Textile University, Faisalabad, Pakistan, (2018)

Zuhaib Ahmad, Brigita Kolcavova Sirkova, Sheraz Ahmad, Muhammad Salman Naeem and Syed Zameer ul Hassan, "Effect of material and stitching on tensile properties of woven fabrics", 1st International Conference on Advances in Engineering and Technology (ICAET 2018), Venue: BUITEMS, Quetta, Pakistan, (2018)

Muhammad Salman Naeem, Syed Zameer Ul Hassan, Zafar Zaved, Abher Rasheed, Zuhaib Ahmad, Babar Ramzan, Saima Javed, "Electrical conductivity and EMI shielding application of high loft non-woven web from acrylic fibrous waste", 1st International Conference on Advances in Engineering and Technology (ICAET 2018), Venue: BUITEMS, Quetta, (2018)

Zuhaib Ahmad, Birgita Kolcavova Sirkova and A.R.R. Aboalasaad, "Yarn deformation in multifilament single layer woven structures using Fourier series", 18th AUTEX World Textile Conference, Venue: Istanbul, Turkey, (2018)

Rajesh Mishra, Hafsa Jamshaid, Mohanapriya Venkataraman, Jiri Militky and Michal Petrů,, "Basalt based Hybrid Fabrics for Composites", IUMRS ICA , Venue: Bali, Indonesia, (2018)

Rajesh Mishra, Hafsa Jamshaid, "Hybrid basalt based concrete", Conference on Advanced textiles, Venue: Hangzhou, China, (2018)

Rajesh Mishra, Hafsa Jamshaid, "Bio-based hybrid composites from basalt", ICCE-NANO-, Venue: Paris, (2018)

Hafsa Jamshaid, Uzair Hussain, "Optimization of fire resistant and comfort properties of knitted fabrics", 91st Textile Institute world conference, Venue: UK, (2018)

Hafsa Jamshaid, Rajesh Mishra Jiri Militky , "Characteristics of woven Basalt and hybrid structures as composite reinforcement", TBIS, Venue: UK, (2018)

invited speaker Hafsa Jamshaid, "Sustainable Materials for Knitted Composites", International Forum on Knitted Shaping Technology, Venue: China, (2018)

Hafsa Jamshaid, "Knitted Application in Technical Textiles", IGATEX, Venue: Pakistan, (2018)

Hafsa Jamshaid, Rajesh Mishra Jiri Militky, "Green Material Applications For Future", 1st International Conference on Advances in Engineering and Technology , Venue: Pakistan, (2018)

Uzair Hussain, Hafsa Jamshaid, Waseem Ibrahim,, "Investigation of functional properties of different blends of Bamboo/Acrylic knitted fabric", 1st international conference (ETK), Venue: Pakistan, (2018)

Hafsa Jamshaid et.al , "Investigation of performance properties of basalt knitted fabric", 1st international conference (ETK), Venue: Pakistan, (2018)

Sikandar Abbas Basra,Hafsa Jamsahid et.al, "Effect of elasatance and cotton percentage on dimensional stability of socks ", 1st international conference (ETK), Venue: Pakistan, (2018)

Sikander Abbas Basra ,Hafsa Jamshaid, et.al. , "Impact of elastance percentage on stretch and recovery of socks ", 1st international conference (ETK), Venue: Pakistan, (2018)

Zeeshan Azam,Hafsa Jamshaid et.al“ , " Study the effect of inlay yarn on mechanical properties and stability of weft knitted structures", 1st international conference (ETK), Venue: Pakistan, (2018)

Jamal Akabar ,Hafsa Jamshaid et.al, "Study the abrasion effect on Polyester yarn due to elevated temperature during knitting", 1st international conference (ETK), Venue: Pakistan, (2018)

Norina Asfand, Hafsa Jamshaid,, "A review of materials used for antistatic property in textile fibers", 1st international conference (ETK), Venue: Pakistan, (2018)

shabaz Ahmad,Hafsa Jamshaid, "Different techniques used to enhance thermo physiological comfort and working efficiency of fire –fighters (A review) ", 1st international conference (ETK), Venue: Pakistan, (2018)

Jamal Akbar, Hafsa Jamshaid et.al i, "Development of special knitted fabric through modification of hand flat knitting machine ", 1st international conference (ETK), Venue: Pakistan, (2018)

F. Ahmad and C. Erkey, "Alginate aerogels for textile applications", International Symposium on Supercritical Fluids, Venue: France, (2018)

N. Ali, A. Rasheed, N. Nasir, N. Mahmood, S. Ahmad, M. Jabbar,, "Development of a smart garment for the performance evaluation of athletes", AUTEX, Venue: Istanbul Turkey, (2018)

A. Rehman, A. Rasheed, T. Hussain, M. Ashraf, S. Ahmad, Babar Ramzan, N. Ali,, "Effect of different processing techniques and softner treatments on the surface friction of cotton fabric", Fibre Society Conference, Venue: Tokyo Japan, (2018)

Sheraz Ahmad, Abher Rasheed, "DEVELOPMENT AND OPTIMIZATION OF MODIFIED ELECTROSPUN NANOWEBS FOR USE IN RESPIRATORY FILTERS", International Conference on Innovation & Entrepreneurship in Textiles IE-TEX 2018 , Venue: National Textile University, Faisalabad, (2018)

Hafsa Jamshaid, Uzair hussain, "Study of Structural Performance and Durability of Textile Reinforced Concrete", International Conference on Technical Textiles (ICTT), Venue: NTU FSD, (2017)

Uzair hussain, Hafsa Jamshaid, " Investigation of comfort properties of flame resistant fabrics", International Conference on Technical Textiles (ICTT), Venue: NTU FSD, (2017)

Uzair hussain, Hafsa Jamshaid, "Study Of Thermal Comfort Of Single Jersey Fabric By Utilization Of Recycled Wool With Polyester", 9th Central European Conference (Fibre � Grade Polymers, Chemical Fibres and Special Textiles), Venue: Liberec,Czech Republic, (2017)

Hafsa Jamshaid, Rajesh Mishra , Jiri Militky, "Evaluation of acoustic Characteristics of woven fabrics in relation to fiber and weave", TBIS , Venue: China, (2017)

Hafsa Jamshaid, Rajesh Mishra , Jiri Militky, "Flame-resistant pure and hybrid woven fabrics from basalt", Autex ., Venue: Greece, (2017)

Muhammad Zubair, Zuhaib Ahmad, Muhammad Usman Javaid, Jean-Yves Drean, Decrette Mathieu, "Influence of fabric architecture and material on physical properties of 3D multilayer woven fabrics", 9th Central European Conference, Venue: Technical University of Liberec, Liberec, Czech Republic, (2017)

Ali Afzal, Jean-Yves Drean, Nabyl Khenoussi, Omer Harzallah, Sheraz Ahmad, Niaz Ahmad Akhtar , "Development of Core Sheath Filament for SMART Textile Applications", Fiber Society’s 2017 Fall Conference, Venue: University of Georgia, Athens, Georgia, USA., (2017)

Abher Rasheed, Nauman Ali, Sheraz Ahmad, "SMART Textiles: Engine for Economic Growth", 1st National Conference on Technical Textiles, Venue: NTU Faisalabad, Pakistan, (2017)

Hafsa Jamshaid, Rajesh Mishra, , Jiř� Militk�, "Performance Characterization Of Basalt Hybrid Woven Fabric Reinforced Concrete", TUL , Venue: Chezk Republic, (2016)

Hafsa Jamshaid, Rajesh Mishra, , Jiř� Militk�, "Comparative Evaluation of Hybrid Composites", ITC & DC, Venue: Dresden ,Germany, (2016)

Hafsa Jamshaid, Rajesh Mishra, , Jiř� Militk�, Muhammad Tayyab Noman, "Effect Of Basalt Nanoparticles On Mechanical And Thermal Characterization ", Nanocon , Venue: Czech Republic, (2016)

Hafsa Jamshaid; Mishra Rajesh & Militky Jiri , "Comparative Evalaution Of Mechanical And Thermal Properties Of Basalt Hybrid And Non Hybrid Fabrics ", 8th International Textile, Clothing & Design Conference - Magic World Of Textiles , Venue: Dubrovnik, Croatia , (2016)

Hafsa Jamshaid, Rajesh Mishra , "New Materials:Basalt fiber ", Design & Light Creative workshop, Venue: Liberec,Chezk Republic, (2016)

Hafsa Jamshaid , Rajesh Mishra, Jiri Militky , "Characterization Of Mechanical Properties Of Basalt Hybrid Fabrics", TBIS-APCC , Venue: Australia , (2016)

Hafsa Jamshaid, Rajesh Mishra,Jiř� Militk�, "Mechanical & Functional Characterization of Basalt woven structures", Fiber society, Venue: ---, (2016)

Hafsa Jamshaid, Rajesh Mishra , "Characteristics Of Woven Basalt Hybrid Composites", Textile Institute conference , Venue: ---, (2016)

Hafsa Jamshaid, Rajesh Mishra, Jiř� Militk� , "Investigation of Thermal Properties of Hybrid Structures", ISERD conference , Venue: ---, (2016)

Salman Naeem, Saima Javed,Vijay Baheti, Jiri Militky, Zuhaib Ahmad, Promoda Behera, "Effect of temperature, heating rate and holding time on the properties of Carbon web made from acrylic waste", STRUTEX, Venue: Technical University of Liberec, Liberec, Czech Republic, (2016)

Ali Afzal, Jean-Yves Drean, Nabyl Khenoussi, Sheraz Ahmad, Niaz Ahmad Akhtar,, "Development of Composite Filament by Conventional Melt Extruder", The Fiber Society 2016 Spring Conference., Venue: University of Haute-Alsace Ecole Nationale Supérieure d’Ingénieurs Sud-Alsace Mulhouse, France , (2016)

Ali Afzal, Jean-Yves Drean, Nabyl Khenoussi, Omer Harzallah, Sheraz Ahmad, , "Evaluation of dimensional stability in cutting of coaxial composite filaments", 16th AUTEX World Textile Conference, Venue: Ljubljana Slovenia, (2016)

Rabia Riaz, Rashid Masood, Tanveer Hussain, Zulfiqar Ali Raza, Azeemullah, Tanzeel Areeb, Zakariya Zubair and Muhammad Umar, "Influence of Hydrolyzed Chitosan Concentration on Linear Density and Tensile Properties of Psyllium, Alginate and Chitosan Composite Fiber", 3rd International Conference on Value Addition & Innovation in Textiles COVITEX, 2015, Venue: National Textile University, Faisalabad, Pakistan, (2015)

Zarqa Shahzadi, Rashid Masood, Tanveer Hussain, Zulfiqar Ali Raza, Niaz Ahmad and Azeemullah, "Effect of drawing ratio on the liquid absorption, swelling and tensile properties of alginate fibre used in wound care", 3rd International Conference on Value Addition & Innovation in Textiles COVITEX, 2015, Venue: National Textile University, Faisalabad, (2015)

Faheem Ahmad, Muhammad Tausif, Mumtaz H Malik, Tanveer Hussain, Ali Afzal, "Effect of key process variables of hydroentanglement on mechanical and comfort properties of nonwoven fabrics.", AUTEX 2015 15th World Textile Conference, Venue: Bucharest, Romania, (2015)

Muhammad Umar, Rashid Masood, Tanveer Hussain, Qasim Zia, Tanzeel Areeb and Azeem Ullah, "Development and characterization of Novel antimicrobial fibers for woundcare applications", AMPE-2015, Venue: NED, Karachi, (2015)

Tanzeel Areeb, Rashid Masood, Tanveer Hussain, Azeem Ullah, and Muhammad Umar, "Synthesis of turmeric loaded alginate-psyllium (TAP) hybrid fibers for woundcare application", ISAM-2015, Venue: NCP, Quaid e Azam University, Islamabad, (2015)

Muhammad Maqsood, "Development of bi-stretch woven fabrics for compression garments�", MedTex, Venue: Lodz Poland, (2015)

Hafsa Jamshaid ,R. Mishra, "Performance utility of novel basalt woven hybrid fabrics", , 6th international Technical Textile congress, Venue: Izmir,Turkey, (2015)

Hafsa Jamshaid ,R. Mishra, "Bio-based composite materials", Keynote lecture, International conference, CET, Venue: Bhubaneswar, (2015)

Hafsa Jamshaid, R. Mishra, " Basalt based hybrid woven stuctures and composites", Keynote lecture, INNOTEX-International conference, JNGEC, Venue: Sundernagar, Himachalpradesh, (2015)

Hafsa Jamshaid, Rajesh Mishra, "Thermal and Mechanical Characterization of Basalt Hybrid Structures", 15th AUTEX world Textile conference , Venue: ----, (2015)

19. Hafsa Jamshaid, Rajesh Mishra, "Thermo-Mechanical Characteristics of Hybrid Woven Structures", Clotech , Venue: ---, (2015)

Hafsa Jamshaid, Rajesh Mishra, "Mechanical & Functional Characterization Of Unconventail Knitted Fabrics", 5 th SMARTEX , Venue: Egypt, (2015)

Hafsa Jamshaid, Rajesh Mishra, "Analysis if basalt fabrics: thermal and mechanical analysis", Svetlanka , Venue: ---, (2015)

Zuhaib Ahmad, Brigita Kolčavov� Sirkov� and Moaz Eldeeb, "Influence of weft setting on shape of yarn cross section in woven fabrics", Světlanka Workshop, Venue: Rokytnice nad Jizerou, Světlanka, Czech Republic, (2015)

Ali Afzal, Jean-Yves Drean, Nabyl Khenoussi, Sheraz Ahmad, Niaz Ahmad Akhtar, , "Influence of spinneret parameter on the development of composite polymeric technical filaments", 15th AUTEX World Textile Conference , Venue: Bucharest, Romania, (2015)

Ali Afzal, Jean-Yves Drean, Nabyl Khenoussi, Niaz Ahmad Akhtar, Sheraz Ahmad,, "Influence of drawing parameter on the development of composite polymeric technical filaments", 3rd International Conference on Value Addition and Innovation in Textile – COVITEX, Venue: NTU Faisalabad, Pakistan, (2015)

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

Muhammad Umair, Yasir Nawab, Khubab Shaker, Muhammad Maqsood, "3D shaped woven structures for structural composite applications", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mehmood Baitab, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

Sheraz Ahmad, Irfan Akhtar, Abher Rasheed, N. Ahmad, "An Approach to fabric drape measurement: Design and development of a digital drape meter ", 1st International Young Engineers Convention, Venue: University of Engineering & Technology Lahore, (2014)

Fatime Iftikhar, Muhammad Hadi, Sheraz Ahmad, Faheem Ahmad, "Combined effect of seams and stitches on seam strength and drape of woven garments ", 1st International Young Engineers Convention, Venue: University of Engineering & Technology Lahore, (2014)

Hafsa Jamshaid, Rajesh Mishra, "Thermal and mechnical properties of woven Basalt fabric reinforced hybrid & non-hybrid composites", 6th International Istanbul conference on Future Technical textiles(FTT2014) , Venue: -----, (2014)

Hafsa Jamshaid, Rajesh Mishra, "Thermal And Mechanical Properties Of Novel Basalt Woven Structures", 20th International conference STRUTEX , Venue: ----, (2014)

Zuhaib Ahmad, Imran Nazir, Syed Ibrahim, Shoaib Iqbal. Muhammad Salman Naeem, "Effect of weave design on comfort properties of fabric made from Bamboo yarn", STRUTEX, Venue: Technical University of Liberec, Liberec, Czech Republic, (2014)

A. Afzal, T. Hussain, H. Malik, A. Nazir, F. Ahmad , "Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics", The 12th Asian Textile Conference, Venue: Shanghai, China, (2013)

Hafsa Jamshaid, Mohnapryia Vankataraman, Rajesh Mishr, "Effect of temperature on mechanical properties of polymer fibers", Textile Science Conference , Venue: Liberec, Czech Republic, (2013)

Sheraz Ahmad, Gerald Barbier, Artan Sinoimeri, Christian Pidancier , "An Approach of Fibre To Fibre Friction Measurement: Modified and Improved Static Friction Tester", ITMC-Intelligent Textiles & Mass Customization,, Venue: Casablanca & Marrakesh, Morocco., (2011)

Sheraz Ahmad, Artan Sinoimeri , "Effect of Fibre Hooks and Crimp on Fibre to Fibre Friction of Cotton", International Conference on Textile and Clothing-3, Venue: University of Management & Technology Lahore Pakistan, (2011)

Hafsa Jamshaid, "Accessing supply risk associated with textile industry ", The Textile Institute Centenary conference, Venue: Manchester, UK, (2011)

Hafsa Jamshaid ,Zafar Javeed , "Prospects of SPF in Pakistan", Fiber Med 11 , Venue: Tampre,Finland, (2011)

Hafsa Jamshaid , "Geotextile past, present and future in Pakistan", 3rd international conference on textile & clothing, Venue: Lahore,Pakistan, (2011)

Yasir Nawab, Sheraz Ahmad, Farid Hussain Mangi,, "Effect of Fibre Fraction on Thermal/Cure Deformation of Thermoset Comoposites", 1st International Conference on Value Addition and Innovation in Textile – COVITEX , Venue: NTU Faisalabad, Pakistan, (2011)

Sheraz Ahmad Artan Sinoimeri , "Effect of Fibre Surface Properties on Inter-fibre Friction of Cotton", 10th world textile conference AUTEX 2010, Venue: Vilnius Lithuania., (2010)

Hafsa Jamshaid/Riaz , "Total Quality Management: Use of Kaizen in Textile mill", World Engineering Congress (Conference on Manufacturing Technology and Management ), Venue: Malaysia, (2010)

Hafsa Jamshaid/Riaz, "Actions for women education and career development in Pakistan", TWOWS Fourth General Assembly and International Conference, Venue: Beijing, China, (2010)

Hafsa Jamshaid, " Occupational Health & Safety ", 7th National seminar, Venue: Karachi,Pakistan , (2010)

Hafsa Jamshaid/Riaz, " WTO & its impact on Pakistan Textile Industry", 4th International conference on Statistical sciences, Venue: Gujrat, Pakistan, (2008)